Updated Jan 13, 2024  Certification Exam Hybrid-Cloud-Observability-Network-Monitoring Dumps - Practice Test Questions

Updated Verified Hybrid-Cloud-Observability-Network-Monitoring dumps Q&As - Pass Guarantee or Full Refund

NEW QUESTION # 83
Which three of the following data points does NetFlow use to confirm traffic is in the same flow? (Choose three.)

• A. interface name
• B. IP address
• C. port number
• D. L3 protocol

Answer: B,C,D

NEW QUESTION # 84
What is the maximum number of resources that can be displayed in flow charts created by SolarWinds' platform views?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

NEW QUESTION # 85
Which two of the following advantages apply to choosing to resolve and store IPv4 hostnames immediately when a flow record is received? (Choose two.)

• A. database query times are decreased
• B. flow views and widgets load faster
• C. domain widgets and reports with DNS names run
• D. endpoint domain name is resolved when requested

Answer: B,C

NEW QUESTION # 86
Which statement is true regarding universal device pollers (UDP)?

• A. poll multiple object IDs (QIDs) for a given technology
• B. polled values are displayed in dedicated resources
• C. polled values are displayed in existing resources
• D. perform operations /transformations on polled data

Answer: D

NEW QUESTION # 87
A node is being polled. The only data visible is response time and packet loss. Detailed statistics are needed.
How should this issue be resolved?

• A. switch polling method from WMI to SNMP
• B. switch polling method from ICMP to SNMP
• C. switch polling method from SNMP to ICMP
• D. switch polling method from SNMP to API

Answer: B

NEW QUESTION # 88
What is the unit of data used for alerting on flows?

• A. ms
• B. mbps
• C. bPs
• D. gps

Answer: C

NEW QUESTION # 89
Which three of the following traffic flow protocols (supported by hybrid cloud observability's flow monitoring) support flow sampling? (Choose three.)

• A. IPF1X
• B. NetFlow V1
• C. Cisco NetFlow
• D. NetFlow Lite

Answer: A,C,D

NEW QUESTION # 90
Which SNMP version will support MD5, SHA1, SHA256, and SHA512 authentication in SolarWinds' platform?

• A. version 2
• B. version 1
• C. version 2c
• D. version 3

Answer: D

NEW QUESTION # 91
A router has been added for health and performance monitoring in hybrid cloud observability, however default SNMP polling data is not visible. Additional network devices have been added and SNMP metrics for those devices are now visible.
How should this issue be resolved?

• A. Perform an MIB database update to update the default
• B. Perform a firmware upgrade on the device to update its MIB file.
• C. Perform an MIB database update and build custom pollers to monitor the device.
• D. Perform an SNMP walk and add the devices MIB file to SolarWinds' MIB database.

Answer: D

NEW QUESTION # 92
Which two of the following troubleshooting steps can be performed when a node is "up" and the data cannot be found in SolarWinds' platform web console? (Choose two.)

• A. Verify hardware health sensors on the device provide both status and values.
• B. Wait ten minutes after a device is added to the console. Refresh the screen.
• C. Ping the device from the polling engine the device is assigned to using the command line.
• D. Add a remote site node and make sure the firewall rules are configured to allow SNMP traffic.

Answer: B,C

NEW QUESTION # 93
Upon examining bandwidth utilization, it is confirmed that the total utilization and flow numbers do not match. What is the likely cause?

• A. a firewall is blocking the data flow configuration
• B. SNMP bandwidth numbers for the interface need to be adjusted in the console
• C. receivingboth IPv4 and IPv6 flows and not all are counted in total bandwidth
• D. flows do not contain all traffic in bandwidth numbers

Answer: D

NEW QUESTION # 94
It is noted in flow source view that some devices are showing "never received" in the last received flow column. It is verified that the flows are not being blocked by a firewall. What is the likely cause?

• A. node is no longer monitored by the monitoring features
• B. flows are IPv6 and not supported by the network monitoring features
• C. interface is no longer monitored by the network monitoring features
• D. a primary field of data is missing and being dropped

Answer: D

NEW QUESTION # 95
Network wide node and interface changes were recently made to several fields including names and IP addresses on nodes, captions, and aliases for their interfaces. Those changes are not updated in the hybrid cloud observability web console, even if a new polling is forced.
What should be done to resolve the issue?

• A. Delete and re-add each of the nodes and their interfaces.
• B. Manually update the changed information in each poller.
• C. Run a rediscovery on both nodes and interfaces to refresh the data.
• D. Run a rediscovery on the node, which will also update the interfaces.

Answer: C

NEW QUESTION # 96
Which two of the following technologies are used when building device studio pollers? (Choose two.)

• A. machine type for node details widget
• B. CPU and memory load of single processor
• C. VLAN and VRF on a dedicated widget
• D. power supply status for vital statistics view

Answer: A,D

NEW QUESTION # 97
The fan of a network device has failed; however, the status shows as "up" on the current hardware health resource in the node details view. Which two of the following causes could be creating the issue? (Choose two.)

• A. resource is showing outdated information
• B. hardware sensors are disabled
• C. wrong MIB being used for polling
• D. threshold of the fan sensor has been forced

Answer: A,C

NEW QUESTION # 98
NetFlow and CBQoS monitoring can be disabled through web console settings. If NetFlow monitoring is disabled for a node or interface, the data collection is stopped. Which two of the following statements are true regarding disabling NetFlow monitoring? (Choose two.)

• A. historical data is retained within the database
• B. enabling and disabling flow collection will not cause gaps within NTA graphs
• C. enabling and disabling flow collection can result in gaps within NTA graphs
• D. historical data is removed from the database

Answer: A,C

NEW QUESTION # 99
Which port allows log analysis in the SolarWinds platform to accept secure syslog messages?

• A. UDP port 514
• B. TCP port 6514
• C. UDP port 10514
• D. TCP port 601

Answer: B

NEW QUESTION # 100
Which two of the following locations can be checked for network hardware health functionality? (Choose two.)

• A. manage sensors
• B. device view
• C. list resources
• D. node properties

Answer: C,D

NEW QUESTION # 101
When a parent object goes down or becomes unresponsive, all interfaces on the switch will also be unresponsive. Though they may be working, "unreachable" status is used because the parent node reports as
"down" and a status cannot be determined. Any alerts where the trigger condition includes node status equal to
"down" are not triggered.
In which section of SolarWinds' platform can an administrator configure the status of child objects as
"unreachable" instead of "down" or "unknown"?

• A. node status participation
• B. polling settings
• C. manage dependencies
• D. core thresholds

Answer: C

NEW QUESTION # 102
What is a possible result of decreasing the top talking optimization value?

• A. reduced page load times
• B. increased storage requirement
• C. slower reporting speed
• D. reduced database performance

Answer: B

NEW QUESTION # 103
Which three of the following technologies are supported to create device studio pollers? (Choose three.)

• A. node details
• B. multi-CPU / memory
• C. VLAN details
• D. single CPU / memory

Answer: A,B,D

NEW QUESTION # 104
Event logs are to be collected from Windows servers in order to be analyzed in hybrid cloud observability.
Which two of the following actions must be taken in order to accomplish this ask? (Choose two.)

• A. configure a rule on hybrid cloud observability to read event log folder locations
• B. configure a rule on hybrid cloud observability to poll the server and collect logs
• C. configure server to send logs to another server running the platform
• D. deploy and configure the platform agent to collect the logs

Answer: C,D

NEW QUESTION # 105
......

Exam Engine for Hybrid-Cloud-Observability-Network-Monitoring Exam Free Demo & 365 Day Updates: https://www.validexam.com/Hybrid-Cloud-Observability-Network-Monitoring-latest-dumps.html

Hybrid-Cloud-Observability-Network-Monitoring PDF Questions and Testing Engine With 153 Questions: https://drive.google.com/open?id=16SCKys2RKXuxS4z8idMOlRnpWjQohjC1