Guaranteed Accomplishment with Newest May-2024 FREE SolarWinds Hybrid-Cloud-Observability-Network-Monitoring

Use Valid New Free Hybrid-Cloud-Observability-Network-Monitoring Exam Dumps & Answers

NEW QUESTION # 72
Through which means does NetFlow traffic analysis (NTA) process flow data?

• A. collector
• B. agent
• C. configuration
• D. polling method

Answer: A

NEW QUESTION # 73
If a NetFlow collector service is showing a "down" status, which two of the following steps are possible troubleshooting options? (Choose two.)

• A. Start or restart SolarWinds' collector service.
• B. Delete and re-add NetFlow collector service.
• C. Start or restart SolarWinds' NetFlow service from Orion service manager.
• D. Confirm the database connection is up and server has free resources.

Answer: C,D

NEW QUESTION # 74
Which two of the following services can be monitored in network insight with network health, performance monitor, and NCM features installed in hybrid cloud observability? (Choose two.)

• A. access lists
• B. policy details
• C. high availability details
• D. global protect VPN

Answer: C,D

NEW QUESTION # 75
Which port needs to be open in order to analyze flow and monitor CBQoS?

• A. Flow (TCP, 2055), CBQoS (SNMP, 161)
• B. Flow (UDP, 2055), CBQoS (SNMP, 161)
• C. Flow (SNMP, 161), CBQoS (TCP, 2055)
• D. Flow (SNMP, 161), CBQoS (UDP, 2055)

Answer: B

NEW QUESTION # 76
Which custom poller supports multiple object IDs (OIDs)?

• A. component monitor
• B. universal device poller (UDP)
• C. device studio
• D. hardware health

Answer: B

NEW QUESTION # 77
It is taking longer than normal for a single mission critical node to poll for data. Where would the polling interval for the node be changed?

• A. Settings > All Setting > Core Thresholds
• B. Node Details Summary > Resources > Memory
• C. Settings > All Settings > Polling Settings
• D. Node Details Summary > Edit Node > Polling

Answer: D

NEW QUESTION # 78
Which port allows log analysis in the SolarWinds platform to accept secure syslog messages?

• A. TCP port 601
• B. UDP port 10514
• C. UDP port 514
• D. TCP port 6514

Answer: D

NEW QUESTION # 79
Which SNMP version will support MD5, SHA1, SHA256, and SHA512 authentication in SolarWinds' platform?

• A. version 2c
• B. version 1
• C. version 2
• D. version 3

Answer: D

NEW QUESTION # 80
Which two of the following technologies are used when building device studio pollers? (Choose two.)

• A. VLAN and VRF on a dedicated widget
• B. machine type for node details widget
• C. power supply status for vital statistics view
• D. CPU and memory load of single processor

Answer: B,C

NEW QUESTION # 81
Which two of the following best practices are used when creating a universal device poller (UDP)? (Choose two.)

• A. Perform SNMPwalk to determine if OID exists.
• B. Run WBemtest to test communication to OID.
• C. Call SolarWinds support for object ID (OID) options.
• D. Consult vendor documentation for OID.

Answer: A,D

NEW QUESTION # 82
A node has been added to hybrid cloud observability and shows an "unknown" status until the data is polled.
The default interval for polling status is two minutes.
If the node stays in the "unknown" status longer than the polling interval, which three of the following steps can be performed to resolve the issue? (Choose three.)

• A. Verify a pingresponsefor this node is received through the ICMP.
• B. Run SNMP walk on the appropriate node.
• C. Ping device from assigned polling engine.
• D. Verify the appropriate polling method is set for this node.

Answer: A,C,D

NEW QUESTION # 83
Which two of the following actions can be taken to resolve duplicate flows? (Choose two.)

• A. Enable automatic addition of flow sources.
• B. Ensure NetFlow is enabled for ingress interfaces.
• C. Enable the flow de-duplication feature.
• D. Ensure NetFlow export is enabled on sub-interfaces.

Answer: B,C

NEW QUESTION # 84
What is the minimum amount of RAM required for setting up log collection in hybrid cloud observability?

• A. 16 GB
• B. 32 GB
• C. 4 GB
• D. GB

Answer: A

NEW QUESTION # 85
Which two of the following requirements apply to network capacity planning? (Choose two.)

• A. All object IDs (QIDs) of network devices are polled in hybrid cloud
• B. Updated MIB database for network performance forecasting.
• C. Nodes, interfaces, and volumes must be managed in HCO.
• D. Enough historical data is available for the last 7 days.

Answer: C,D

NEW QUESTION # 86
After creating a new device studio poller that appears to be returning values on a test device, it is then applied to additional nodes. One of these new devices is not returning the statistics of the test node. Which two of the following reasons might be the cause of the issue? (Choose two.)

• A. object IDs (QIDs) are not supported
• B. communication issue exists in new device
• C. devices have different firmware versions
• D. new device needs to be rebooted

Answer: A,C

NEW QUESTION # 87
Which custom poller can display the poller results as a chart, gauge, or table?

• A. device studio poller
• B. network insight
• C. hardware health
• D. universal device poller (UnDP)

Answer: D

NEW QUESTION # 88
If the data collected for hardware health is incorrect, which step could rectify the issue?

• A. Create a custom goller in device studio for fan speed, power supply, and temperature.
• B. Change the MIB tree used for polling.
• C. Change the poller assigned to sensor.
• D. Download the MIB file from the SolarWinds website and add it to the device's firmware.

Answer: B

NEW QUESTION # 89
Which application classification system is used with deep packet inspection technologies to provide better visibility into network traffic and is a mechanism used by certain Cisco routers/switches to recognize dataflow by inspecting some of the packets sent?

• A. flow navigator
• B. autonomous systems
• C. CBQoS drops
• D. NBAR2 applications

Answer: D

NEW QUESTION # 90
What is the default amount of historical data needed for calculating capacity forecast?

• A. 1 to 30 days
• B. 1 to 90 days
• C. 7 to 180 day
• D. 7 to 30 days

Answer: C

NEW QUESTION # 91
Which SNMP version allows usernames and passwords?

• A. version 2c
• B. version 4
• C. version 1
• D. version 3

Answer: D

NEW QUESTION # 92
Which two of the following requirements are needed to monitor an application on a server? (Choose two.)

• A. Add the IP address of the server into an IP address group.
• B. Click the monitor recommendation applications button.
• C. Add application and ports using server as source and destination IP addresses.
• D. Find the application to monitor in the list of available applications and enable it.

Answer: C,D

NEW QUESTION # 93
Which two of the following requirements are needed to set up network devices and export NetFlow data?
(Choose two.)

• A. Each device can be optionally configured to export NetFlow data to SolarWinds' NTA.
• B. The interface through which a device exports NetFlow data must be monitored in NPM.
• C. Each device that exports NetFlow data to SolarWinds' NTA must be monitored in NCM.
• D. Each device that exports NetFlow data to SolarWinds' NTA must be monitored in NPM.

Answer: B,D

NEW QUESTION # 94
......

Hybrid-Cloud-Observability-Network-Monitoring Braindumps PDF, SolarWinds Hybrid-Cloud-Observability-Network-Monitoring Exam Cram: https://www.validexam.com/Hybrid-Cloud-Observability-Network-Monitoring-latest-dumps.html

New 2024 Hybrid-Cloud-Observability-Network-Monitoring Sample Questions Reliable Hybrid-Cloud-Observability-Network-Monitoring Test Engine: https://drive.google.com/open?id=16SCKys2RKXuxS4z8idMOlRnpWjQohjC1