GET Real CheckPoint 156-835 Exam Questions With 100% Refund Guarantee Oct 16, 2023

Get Special Discount Offer on 156-835 Dumps PDF

Furthermore, this certification is a powerful tool for career advancement. Holding the certification opens up a range of opportunities for IT professionals who want to specialize in network and security management. Additionally, the prestigious nature of the certification enhances their professional reputation by demonstrating a high level of proficiency and expertise in their field.

To pass the CheckPoint 156-835 Exam, candidates should have a deep understanding of the Check Point Maestro architecture, including its deployment and management, its high availability features, and its scalability. They should also be familiar with the core principles of network security, such as VPN, Firewall, and IPS, as well as with the advanced features of Check Point Maestro, including its orchestration and automation capabilities.

 

NEW QUESTION # 25
What does asg monitor command do?

• A. Monitor health status of entire system
• B. Show real-time cluster status of Appliances in Security Group
• C. This command does not exist
• D. Monitor traffic on Appliances in Security Group

Answer: B

NEW QUESTION # 26
What is the Iterator process?

• A. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance recovery
• B. Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance failure
• C. Iterator is the process that follow Appliance recovery and simulates what was a distribution if recovered Appliance was alive
• D. Iterator is the process that simulates distribution in case of Appliance failure

Answer: B

NEW QUESTION # 27
What kind of cluster Dual-Site can be compared to?

• A. Active-Active
• B. Active-Standby only
• C. VSLS only
• D. Active-Standby or VSLS

Answer: D

Explanation:
A Dual-Site cluster is a type of cluster that combines the features of both Active-Standby and VSLS (Virtual Systems Load Sharing) clusters. Dual-Site clusters allow you to have two active clusters, one at each site, and the traffic is distributed between the two sites based on predefined rules and priorities.
A Dual-Site cluster can be compared to an Active-Standby cluster because one of the clusters is running in a passive mode and is only activated in case of a failure or a planned maintenance of the active cluster. And also can be compared to a VSLS cluster because both clusters are active and share the traffic load.
It's a type of High Availability solution that provides redundancy and failover capabilities across two geographically separated sites. In case of a failure or a outage on one site, the traffic is automatically redirected to the other site, ensuring that the service is not interrupted.

NEW QUESTION # 28
There is a Security group of 10 Appliances and all of them are up and running. How many Appliances within a Security Group keep the same connection in its connection table in case of NAT?

• A. 0
• B. All 10
• C. 1
• D. Between 2 and 4

Answer: D

NEW QUESTION # 29
What is the purpose of g_tcpdump command?

• A. The same as tcpdump, just on Scalable Platform
• B. Collects traffic dump from Sync network
• C. Collects traffic dump from all Active Appliances within Security Group
• D. Collects traffic dump from CIN network

Answer: C

NEW QUESTION # 30
Which setting is required in order to connect an appliance with 40Gbps downlink interface and DAC to the Orchestrator MHO-140?

• A. On Appliance: Change a port speed to 10Gbps
• B. On Orchestrator: Change QSFP mode from 100Gbps to 40Gbps
• C. On Orchestrator: Change port type from uplink to downlink
• D. No change required

Answer: C

NEW QUESTION # 31
How many power supplies are presented on MHO-170?

• A. 0
• B. 1
• C. 2
• D. 1 with option for 2

Answer: B

NEW QUESTION # 32
What is the distribution mode?

• A. Distribution mode is the same as QSFP mode
• B. Distribution mode is how the Orchestrator distributes traffic in between Security Groups
• C. Distribution mode means selected algorithm for traffic distribution in between Appliances
• D. Distribution mode means selected algorithm for traffic distribution in between Orchestrators

Answer: C

NEW QUESTION # 33
There are two 10Gbps dual-port NIC installed on a 6800 appliance. Which interfaces should be connected to Orchestrator 1 for downlinks' intra-orchestrator redundancy when using two Orchestrators?

• A. Port 1 in Slot 1 and Port 2 in Slot 1
• B. Port 1 in Slot 1 and Port 1 in Slot 2
• C. Any pair of available ports
• D. Port 1 in Slot 2 and Port 2 in Slot 1

Answer: B

NEW QUESTION # 34
Complete the sentence: Orchestrators works as...

• A. Hot-Swap RAID
• B. Active-Standby cluster
• C. Load Sharing cluster
• D. Active-Active cluster

Answer: D

NEW QUESTION # 35
What is the default range of physical ports for downlinks on Orchestrator MHO-170?

• A. 1 - 16
• B. 25 - 32
• C. 3 - 16
• D. 17 - 31

Answer: D

NEW QUESTION # 36
Complete the sentence: When using a Break-out cable...

• A. All tails of the break-out cable must represent the same type of ports
• B. All tails of the break-out cable must represent downlinks
• C. All tails of the break-out cable must represent uplinks
• D. Each tail of the break-out cable represent an independent port

Answer: D

NEW QUESTION # 37
What does the lldpctl command do?

• A. Show all devices discovered by LLDP protocol on downlink ports
• B. Discover orchestrators
• C. Show all devices discovered by LLDP protocol on all ports
• D. Show all devices discovered by LLDP protocol on uplink ports

Answer: C

NEW QUESTION # 38
What kind of cluster Dual-Site can be compared to?

• A. Active-Standby only
• B. Active-Standby or VSLS
• C. VSLS only
• D. Active-Active

Answer: D

NEW QUESTION # 39
What will happen in case of NAT of the traffic passing through Management network?

• A. This traffic will not pass correction, since it will be dropped
• B. This traffic will pass with no inspection
• C. Orchestrator will disable NAT and traffic will pass with no issue
• D. Since Management traffic is always going to SMO, it will take a care for Correction Layer and will re-distribute traffic to other Appliances

Answer: A

NEW QUESTION # 40
There are two appliances within the same Security Group. One of them is connected by One downlink only, another one by Two downlinks. Assuming there's no NAT and no VPN, what would be proportion of traffic distribution done by Orchestrator?

• A. 100%/0%
• B. 66%/33%
• C. 50%/50%
• D. 33%/66%

Answer: C

NEW QUESTION # 41
On MHO-170 - In default configuration, what are GAIA names of Security Group Management ports?

• A. eth1-Mgmt3 and eth1-Mgmt4
• B. eth1-Mgmt1 and eth1-Mgmt3
• C. eth1-Mgmt1 and eth1-Mgmt2
• D. eth1-Mgmt1 and eth2-Mgmt1

Answer: B

NEW QUESTION # 42
For a VSX configuration - Which statement is wrong?

• A. All Virtual Systems exist on the SMO
• B. VSX configuration is the same on all Appliances within the same Security Group
• C. All Virtual Systems exist on all Appliances
• D. Each Appliance owns different Virtual Systems

Answer: C

NEW QUESTION # 43
What command will be used for updating fwkern.conf file on all Appliances within Security Group?

• A. g_update_kernel
• B. g_update_conf_file
• C. vi
• D. g_all update_conf_file

Answer: D

NEW QUESTION # 44
Where should sx_api_ports_dump,py command be ran?

• A. Management server
• B. Orchestrator
• C. Security Group
• D. SMO Appliance

Answer: B

NEW QUESTION # 45
What is the Sync network on Appliances used for?

• A. To transfer data in case of full utilization of the downlink interfaces
• B. To transfer configuration files from Orchestrators to Appliances
• C. May be used for any purpose, but synchronization always have priority
• D. To synchronize configurations and connections in between connection tables of different Appliances

Answer: D

NEW QUESTION # 46
What is the max amount of Orchestrators in Dual-site setup?

• A. 0
• B. 4 per Security Group
• C. 1
• D. 2 per Security Group

Answer: A

NEW QUESTION # 47
For a VSX configuration - Which statement is wrong?

• A. VSX configuration is the same on all Appliances within the same Security Group
• B. All Virtual Systems exist on all Appliances
• C. Each Appliance owns different Virtual Systems
• D. All Virtual Systems exist on the SMO

Answer: D

NEW QUESTION # 48
How many orchestrators may Dual-Site include''

• A. 2 or 4
• B. 0
• C. Only 4
• D. 1

Answer: A

NEW QUESTION # 49
What is the minimal requirement for a Security Group?

• A. 1 Appliance and 1 administrator with Multi-Domain admin permissions
• B. 1 Appliance and 1 management port
• C. None, it may be empty.
• D. 2 Appliances and 2 ports

Answer: B

NEW QUESTION # 50
......

To become a Check Point Certified Maestro Expert, one must pass the 156-835 exam. 156-835 exam consists of 90 multiple-choice questions and has a time limit of 120 minutes. 156-835 exam covers a wide range of topics, including the installation and configuration of the Maestro solution, troubleshooting common issues, and optimizing performance. Candidates must have a deep understanding of Check Point's security solutions, including the Firewall, VPN, and IPS technologies.

 

PDF Download CheckPoint Test To Gain Brilliante Result!: https://www.validexam.com/156-835-latest-dumps.html

Provide Updated CheckPoint 156-835 Dumps as Practice Test and PDF: https://drive.google.com/open?id=1M7XdZpinMZeAfweQ2AS3pIaGuBvwn628