[Apr-2024] Free MS-720 Exam Questions MS-720 Actual Free Exam Questions
Verified MS-720 dumps and 123 unique questions
NEW QUESTION # 18
You need to migrate a Vancouver facility user named jsmith from Skype for Business Server to Teams.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Assign the microsoft 365 Phone System license to jsmith.
2 - Run the following command. Move-CsUser -Identity..
3 - Run the following command. Grant-CsOnlineVoiceRoutingPolicy...
Reference:
https://docs.microsoft.com/en-us/skypeforbusiness/hybrid/move-users-from-on-premises-to-teams
https://docs.microsoft.com/en-us/skypeforbusiness/hybrid/move-users-from-on-premises-to-teams
https://docs.microsoft.com/en-us/microsoftteams/direct-routing-voice-routing
NEW QUESTION # 19
You have a Microsoft Teams Phone deployment.
You have a dial plan that contains the following normalization rule:
Pattern: ^8?(\d{7})$
Translation: +1330$1
How will the phone numbers be normalized? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 20
Your company has a Microsoft Teams Phone deployment that uses Direct Routing and a single carrier.
You deploy a new Session Border Controller (SBC) that shows as healthy in the Microsoft Teams admin center.
You place a test call over the new SBC, and the call succeeds.
When you attempt to transfer the call, the transfer fails. A portion of the SIP ladder is shown in the exhibit.
(Click the Exhibit tab.)
What is a possible cause of the issue?
- A. notify is enabled in the SIP options of the SBC.
- B. The carrier rejects the format of the forwarded FROM number.
- C. The SSL certificate of the SBC is incorrect.
- D. The Refer on the SBC is misconfigured.
Answer: D
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/troubleshoot/phone-system/direct-routing/issues-with-call-trans
Topic 1, Contoso Case Study 2
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, dick the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment and problem statements- If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
General Overview
The network contains an Active Directory forest named contoso.com that syncs to Microsoft 365 by using Azure AD Connect Domain controllers run Windows Server 2019.
Physical Locations
Contoso has offices in Toronto, New York, and London. Contoso has a manufacturing facility in Vancouver.
Contoso has a global sales team that works remotely without a physical corporate office.
Active Directory Environment
The network contains an Active Directory forest named contoso.com that syncs to Microsoft 365 by using Azure AD Connect. Domain controllers Windows Server 2019.
Microsoft Office 365
Contoso has a Microsoft 365 subscription. All users are assigned Microsoft 365 F3 licenses. Contoso uses Microsoft Exchange Online for email.
Network Infrastructure
All the offices connect to each other by using a private WAN. The Toronto office has a 1 -Gbps internet circuit and the London office has a 100-Mbps internet circuit. Internet access for all the offices is provided through the Toronto and London offices.
The remote sales team users connect to the network by using VPN connections. The remote users use various connection types, including wireless and mobile.
Skype for Business Server traffic for the remote users is routed through the VPN connections.
Telephony
Contoso uses a centralized Skype for Business Server 2015 deployment configured for disaster recovery between the Toronto and London datacenters.
Each frontend pool connects to the PSTN through a pair of managed Session Border Controllers (SBCs) that provide Enterprise Voice and dial-in conferencing.
Contoso has a Skype for Business Server Survivable Branch Appliance (SBA) and a local SBC that connect to a Primary Rate Interface (PRO in the Vancouver manufacturing facility.
Contoso has hybrid connectivity deployed between Skype for Business Server and Office 365.
All SBCs are Microsoft Teams-certified.
The returns department has an auto attendant that uses an ID of [email protected].
Planned Changes
Contoso plans to migrate all existing services from Skype for Business Server to Teams.
Direct Routing will be deployed for the existing SBCs.
Existing meeting rooms have Skype for Business Server video endpoints that are Skype for Business Server-certified. The endpoints are not Teams-certified.
You plan to use the video endpoints in Teams until the equipment is replaced with Microsoft Teams Rooms.
A limited pilot of the Teams migration and the Direct Routing deployment will occur in the Vancouver facility before deployment to the entire company.
Technical Requirements
Contoso identifies the following technical requirements:
* During the limited pilot, the media path must be optimized.
- Media flow/ for the remote sales team users must be optimized.
Contoso identifies the following technical requirements:
* During the limited pilot, the media path must be optimized.
* Media flow/ for the remote sales team users must be optimized.
* All sales team users require inbound toll free audio conferencing-
* Users in the Vancouver facility must be able to place emergency calls regardless of internet availability.
* When users in the returns department dial out, the outbound calls must display Contoso and the department's phone number.
* The video endpoints for the existing meeting rooms must be able to be used for both voice and video conferencing in Teams meetings. All sales team users require inbound toll free audio conferencing-
* Users in the Vancouver facility must be able to place emergency calls regardless of internet availability.
* When users in the returns department dial out, the outbound calls must display Contoso and the department's phone number.
* The video endpoints for the existing meeting rooms must be able to be used for both voice and video conferencing in Teams meetings.
NEW QUESTION # 21
You are optimizing a network to better support voice and collaboration workloads in Microsoft Teams. When the users are at a specific corporate site, you need to prevent the users from adding video during calls.
Solution: You run New-csTeamsMeetingPolicy and set the-AllowIPvideo parameter to SFalse.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
NEW QUESTION # 22
Your company has offices throughout the United States.
The company is opening a new office in Scranton. The office will occupy two floors in the same building.
You need to ensure that if an emergency call is placed, the local emergency dispatchers know from which floor the call came.
How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/skype/new-csonlinelislocation?view=skype-ps
https://docs.microsoft.com/en-us/powershell/module/skype/set-csonlinelislocation?view=skype-ps
NEW QUESTION # 23
You need to provision a Microsoft Teams-certified common area phone device at a field site. The solution must ensure that a standard user can complete the physical handset tasks without sharing credentials.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Graphical user interface, text, table Description automatically generated with medium confidence
Reference:
https://docs.microsoft.com/en-us/MicrosoftTeams/devices/remote-provision-remote-login
NEW QUESTION # 24
You have a Microsoft Teams Phone deployment.
You need to implement Local Media Optimization for Direct Routing users at a site.
Users at the site frequently perform the following actions:
Park calls.
Place calls on hold.
Transfer calls to other users.
Escalate calls to conference calls.
Which action will be affected by implementing Local Media Optimization?
- A. Transfer calls to other users.
- B. Place calls on hold.
- C. Escalate calls to conference calls.
- D. Park calls.
Answer: C
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/direct-routing-media-optimization#known-issues
NEW QUESTION # 25
You are enabling users for Direct Routing.
You already assigned licenses to the users.
You need to complete the user setup.
Which two cmdlets should you run? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Grant-CsVoicePolicy
- B. Grant-CsOnlineVoiceRoutinePolicy
- C. Set-CsUSerPstnSettings
- D. Set-CsUser
- E. Set-CsOnlineVoiceUser
Answer: B,D
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/direct-routing-enable-users
https://docs.microsoft.com/en-us/microsoftteams/direct-routing-voice-routing
NEW QUESTION # 26
You have a dial plan named DPI.
You need to assign DPI to a new Microsoft Teams user named User1. You must verify that the appropriate dial plan and the associated normalization rules are assigned to User1.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/create-and-manage-dial-plans
NEW QUESTION # 27
From Voice in the Microsoft Teams admin center, you select Operators and add an operator.
You need to enable users for Microsoft Teams Phone.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
Graphical user interface, text, application Description automatically generated
Reference:
https://docs.microsoft.com/en-us/microsoftteams/operator-connect-configure
NEW QUESTION # 28
You need to provide Microsoft Teams users with the ability to perform PSTN calling through a Session Border Controller (SBC). Which licenses can you assign to achieve the goal?
- A. Microsoft 365 E5 and Office 365 E5
- B. Microsoft 365 E3 and Microsoft 365 E5
- C. Office 365 E3 and Office 365 E5
- D. Office 365 E3 and Microsoft 365 E3
Answer: D
NEW QUESTION # 29
Your company has offices in 10 countries. The company has a tenant dial plan configured for each country.
The company recently opened an office in a new country.
You need to create a new tenant dial plan that meets the unique dialing requirements of the new country.
What should you do?
- A. Run the New-CsOnlineVoiceRoutingPolicy cmdlet.
- B. Run the Sec-CsTenancDialPlan cmdlet.
- C. From the Microsoft Teams admin center, select Locations, select Network topology, and then select Add.
- D. From the Microsoft Teams admin center, select Voice, select Dial plan, and then select Add.
Answer: D
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/create-and-manage-dial-plans
NEW QUESTION # 30
You have a dial plan named DPI.
You need to assign DPI to a new Microsoft Teams user named User1. You must verify that the appropriate dial plan and the associated normalization rules are assigned to User1.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/create-and-manage-dial-plans
NEW QUESTION # 31
You need to connect the analog intercoms to Teams Phone.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Create a trusted application endpoint for Teams.
- B. Register the ATAs with a Teams-certified SBC.
- C. Create a configuration profile for IP phones.
- D. Create a resource account for each intercom.
- E. Enable Direct Routing to a Teams-certified SBC.
Answer: B,E
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/direct-routing-analog-devices This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, dick the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment and problem statements- If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
NEW QUESTION # 32
Your company deploys 200 Microsoft Teams Rooms on Windows systems.
You are evaluating whether to purchase the Microsoft Teams Rooms Premium license for the rooms.
Which two actions require the Microsoft Teams Rooms Premium license? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point
- A. Postpone updates until a certain date.
- B. Download device logs.
- C. Modify the Direct guest jam settings
- D. Get reporting insights into room usage and participant count
- E. View peripheral health.
Answer: D,E
NEW QUESTION # 33
You have a Microsoft Teams Phone deployment.
You are deploying Direct Routing.
All users have a SIP URI in the format of [email protected]. The Session Border Controller (SBC) is named sbc.voice.contoso.com.
When troubleshooting errors on the SBC, you receive the warning shown in the following exhibit.
What is a possible cause of the issue?
- A. Microsoft 365 Phone System licenses are not assigned to the users.
- B. The firewall blocks inbound traffic on port 443 to the SBC.
- C. The certificate does not match the FQDN on the SBC.
- D. Only TLS 1.0 is enabled on the SBC.
Answer: C
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/troubleshoot/phone-system/direct-routing/sip-options-tls-certificate-issues
NEW QUESTION # 34
You have a Teams Phone deployment that contains an Operator Connect provider in Canada.
You implement a common area phone named lobbyphone1.
You need to configure lobbyphonel to meet the following requirements:
* Outgoing calls must be placed only from within Canada.
* Dial out during audio conferencing must be restricted.
How should you complete the command? To answer, select the appropriate options in the answer area.
Answer:
Explanation:
Explanation
NEW QUESTION # 35
You have two users named User1 and User2.
You need to configure User2 as a call delegate for Uset1. The solution must meet the following requirements:
* Minimize disruptions to User1.
* Prevent User2 from placing cans on behalf of User1.
* Prevent User2 from modifying the settings of User1.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
NEW QUESTION # 36
You are replacing the on-site PBX at the Georgia warehouse with Teams.
You need to maintain the functionality of the PBX after migrating to Teams.
Which sequence of steps should you perform? To answer, drag the appropriate steps to the correct locations.
Each step may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Graphical user interface, text, application, chat or text message Description automatically generated
Reference:
https://docs.microsoft.com/en-us/microsoftteams/manage-emergency-calling-policies
NEW QUESTION # 37
Your company has offices throughout the United States.
The company is opening a new office in Scranton. The office will occupy two floors in the same building.
You need to ensure that if an emergency call is placed, the local emergency dispatchers know from which floor the call came.
How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/skype/new-csonlinelislocation?view=skype-ps
https://docs.microsoft.com/en-us/powershell/module/skype/set-csonlinelislocation?view=skype-ps
NEW QUESTION # 38
You have a Microsoft Teams Phone deployment in an office.
When a user dials an emergency number, the safety team for the office is notified.
Your company opens a new office that has a Teams Phone deployment
You need to ensure that the safety team for the new office is notified when an emergency call is placed from that office.
How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION # 39
Your company currently allows call park lot all PSIN users. The call pack policies are configured as shown in the exhibit. (Click the Exhibit tab.)
You have a Microsoft 365 group named Help Desk.
You need to ensure that only the Help Desk group can use call park. The solution must minimize the number of policies and administrative effort.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Create a new call park policy named Policy2 and set Allow call park to Off.
- B. In the Global (Org-wide default) policy, set Allow call park to Off.
- C. Assign Policy1 to the Help Desk group.
- D. Assign the Global (Org-wide default) policy to the users in the Help Desk group.
- E. Assign Policy2 to all users.
- F. Create a new call park policy named Policy1 and set Allow call park to On
Answer: B,C,F
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/call-park-and-retrieve
NEW QUESTION # 40
You need to configure a toll-free dial in bridge for Teams meetings. The solution must meet the technical requirements.
Which three prerequisites must be met before you can assign the toll-free bridge to Teams meeting organizers? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Get a Dedicated conference bridge (Toll Free) number.
- B. Get an auto attendant toll-free number.
- C. Purchase a Microsoft 365 Domestic and International Calling Plan license.
- D. Assign a phone number to the bridge.
- E. Purchase Communications Credits.
- F. Assign a phone number to a resource account.
- G. From the meeting policy, set Allow dial -in users to bypass the lobby to On.
Answer: A,D,E
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/set-up-audio-conferencing-in-teams
NEW QUESTION # 41
You are adding new sites to your company.
The reporting team needs location-based reports in Microsoft Power B1 that include the subnet information of the new sites.
You need to add the information to Microsoft Teams.
What should you do?
- A. From the Microsoft Teams admin center, define a network subnet.
- B. From the Microsoft Teams admin center, define a network topology.
- C. From the Microsoft Call Quality Dashboard, upload tenant data.
- D. From the Microsoft Teams admin center, add the subnets to the Network planner.
Answer: C
NEW QUESTION # 42
Which two cmdlets should you run? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. You already assigned licenses to the users.
- B. You are enabling users for Direct Routing.
- C. You need to complete the user setup.
Answer: B
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/direct-routing-enable-users
https://docs.microsoft.com/en-us/microsoftteams/direct-routing-voice-routing
NEW QUESTION # 43
......
Microsoft MS-720 (Microsoft Teams Voice Engineer) Certification Exam is a comprehensive exam designed to test the candidate's knowledge and skills in implementing, managing, and troubleshooting Microsoft Teams Voice solutions. MS-720 exam is intended for individuals who have experience in deploying and managing Microsoft Teams Voice solutions in a business environment.
Earning the Microsoft MS-720 certification demonstrates that you have the skills and knowledge necessary to deploy, configure, and manage Microsoft Teams voice solutions. Microsoft Teams Voice Engineer certification also validates your ability to troubleshoot and optimize voice performance, making you a valuable asset to any organization using Microsoft Teams.
Microsoft MS-720 exam, also known as the Microsoft Teams Voice Engineer exam, is designed to test the skills and knowledge of IT professionals in configuring, deploying, and managing Microsoft Teams Voice solutions. Microsoft Teams Voice Engineer certification exam is intended for individuals who work with Microsoft Teams Voice solutions and want to validate their expertise in this area. MS-720 exam covers various topics such as configuring voice policies and call routing, managing voice quality and network requirements, and troubleshooting common issues related to Microsoft Teams Voice solutions.
Latest 100% Passing Guarantee - Brilliant MS-720 Exam Questions PDF: https://www.validexam.com/MS-720-latest-dumps.html
MS-720 Dumps for Pass Guaranteed - Pass MS-720 Exam: https://drive.google.com/open?id=1IWx-2RxYR-3kMs8duLvpvETIDoZA16tQ