Study HIGH Quality H19-424_V1.0  Free Study Guides and Exams Tutorials

Download Huawei H19-424_V1.0 Exam Dumps to Pass Exam Easily

NEW QUESTION # 46
In AC3.0, when deploying a Fabric network, which of the following operations is not an operation in Fabric network deployment?

• A. Create a fabric network
• B. Configure a policy template
• C. Configure access management
• D. Create an external network

Answer: B

NEW QUESTION # 47
The following statements about MAC routing are incorrect ()

• A. If the Flag value of the migration attribute in the MAC address route is 1, it indicates a static MAC address, and the static MAC address is preferred.
• B. The Route Distinguisher value (RD value) of the MAC route is generated by the value configured by the evpn source-address
• C. and MAC address routes are filled with two labels (that is, both mplslable1 and mplslable2 are valid in packets).
• D. When a MAC address route is migrated, the large sequence number in the MAC migration attribute is preferred.

Answer: B

NEW QUESTION # 48
In the V200R022 version of the S switch, the description of the S5X31(S)-S multi-rate switch is wrong ()

• A. Support 2G large cache to cope with high burst business traffic.
• B. It supports advanced features such as VxLAN and MPLS, real-time telemetry data collection, and network O&M visualization, which can be widely used in scenarios such as medium-sized campus aggregation and small campus cores.
• C. It can be used as a remote module for the central switch to achieve simplified networking.
• D. 3 power supply design, support N+1 redundancy, full 802.3bt90W PoE++ power supply for all ports, and the maximum PoE output power of the whole machine can reach 2268W, adapting to the power supply needs of massive terminals.

Answer: A

NEW QUESTION # 49
In which delivery link is the planning and design tool mainly used ()

• A. Installation, deployment and testing
• B. Pre-sales configuration
• C. After-sales delivery planning and design
• D. Operation and maintenance

Answer: C

NEW QUESTION # 50
What is the detection technology used for TEHSB and VPNFRR protection solutions in the SDN-WAN solution?

• A. Y1731
• B. Ethoam
• C. NQA
• D. BFD

Answer: D

NEW QUESTION # 51
The description of the main controller of the CloudEngine S8700 switch is incorrect.

• A. 1:1 primary/standby in the frame, primary/standby switchover and packet loss < 5ms
• B. The main control and switching are integrated, and the centralized architecture has a lower switching delay
• C. The main controller does not provide a business port
• D. 04, 06, and 10 main control boards cannot be shared

Answer: C

NEW QUESTION # 52
When using the planning and design tool, which of the following statements about the logical networking of the campus network is incorrect?

• A. Support multi-region, multi-aggregation node design
• B. You can't manually drag and drop to modify
• C. The logical networking initialization diagram is determined by the parameters of the scenario of the solution
• D. The working mode supports stand-alone and stacked

Answer: B

NEW QUESTION # 53
In the virtualization scenario, we recommend using () external network design when using a unified access policy for different VNs

• A. L3 exclusive export
• B. L2 exclusive export
• C. L2 shared exit
• D. L3 shared exit

Answer: D

NEW QUESTION # 54
In the multi-campus interconnection LAN-WAN convergence scenario, refer to the following topology
[Campus topology-8 [The description of the design and deployment of the dual-gateway Interlink solution is incorrect ()

• A. Synchronize information between dual-gateway devices through the interlink control sub-interface, such as the synchronization and backup of application recognition results, overlay connection information, and connection quality information. Interlink serves as a dual-gateway device interconnection interface that forwards inter-device (VPN) traffic through sub-interfaces.
• B. Interlink cannot borrow the Layer 2 service interface on the CPE LAN side
• C. Interlink serves as a dual-gateway device interconnection interface, providing forwarding of inter-device service (VPN) traffic through sub-interfaces.
• D. Interlink can be interconnected with a direct link, and when the site service traffic is large and the CPE port resources are sufficient, it is recommended that Interlink use an Eth-trunk link. Interlink cannot borrow Layer 2 service interfaces on the CPELAN side.

Answer: B

NEW QUESTION # 55
In the network plan of iMaster NCE-Campus, what is the recommended networking mode if there is no special isolation requirement??

• A. Three-plane networking
• B. Four-plane networking
• C. Two-plane networking

Answer: C

NEW QUESTION # 56
Configure the main interface of the translation tool, and some lines are marked with different background colors for the purpose of ()

• A. Remind users of the points that need special attention, such as: those that need to be manually confirmed and processed, and those that can be discarded
• B. In order to export the configuration, the configuration does not have the background color everywhere when exporting the configuration
• C. It has no practical effect
• D. The relocation is too boring, and the interface is too monotonous, purely for decoration and good looks

Answer: A

NEW QUESTION # 57
Which of the following does not belong to the planning and design of a virtual network?

• A. VN planning and design
• B. Deployment automation design
• C. Strategy design

Answer: B

NEW QUESTION # 58
Which of the following protocols does the iMaster NCE Campus controller use to register devices and deliver configurations?

• A. HTTP
• B. HTTPS
• C. Netconf
• D. HTTP2.0

Answer: C

NEW QUESTION # 59
The current controller does not support which of the following authentication methods?

• A. 802.1X
• B. Portal
• C. TACACS
• D. P2P

Answer: D

NEW QUESTION # 60
The description of the intelligent routing strategy of the LAN &WAN convergence solution is incorrect

• A. Support bandwidth conditional traffic selection
• B. LTE can only be used as an escape link
• C. The link intelligent handover conditions include packet loss, delay, and jitter
• D. Support setting the active/standby link based on the application/application group, andintelligently select the link for data forwarding

Answer: B

NEW QUESTION # 61
In the WLAN scenario, the following statements are wrong for demand collection ()

• A. Coverage are answer confirm the key coverage area (such as office, conference room, etc.) and common coverage area (such as stairs, toilets, etc.) required by the customer
• B. Number of concurrent users: the total number of terminals connected in the current coverage area, and how many people in the coverage area are planned to be connected at the same time
• C. Pay the signal field strength requirements in the area, for example, -40dBm~-65dBm in key areas, and
  >-75dBm in ordinary areas
• D. Bandwidth requirements: the main types of services planned by the customer and the bandwidth requirements for each user

Answer: B

NEW QUESTION # 62
......

Get 100% Real Free HCSP Presales H19-424_V1.0 Sample Questions: https://www.validexam.com/H19-424_V1.0-latest-dumps.html

Accurate H19-424_V1.0 Questions with Free and Fast Updates: https://drive.google.com/open?id=1uELVDbk94ZR8Hz1txwCzKkFQiv9rSKB7