[Sep-2021] MS-500 Pre-Exam Practice Tests Exam Questions and Answers for Microsoft 365 Study Guide [Q129-Q152]

[Sep-2021] MS-500 Pre-Exam Practice Tests | Exam Questions and Answers for Microsoft 365 Study Guide

Microsoft 365 Security Administration Certification Sample Questions

NEW QUESTION 129
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password

Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
admin@[email protected]
Microsoft 365 Password: #HSP.ug?$p6un
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support only:
Lab instance: 11122308

You need to ensure that a user named Allan Deyoung uses multi-factor authentication (MFA) for all authentication requests.
To complete this task, sign in to the Microsoft 365 admin center.

Answer:

Explanation:
See explanation below.
Explanation
1. Open the Admin Center and go to Users > Active Users
2. Open Multi-factor authentication
Don't select any user yet, just open the Multi-factor authentication screen. You will find the button in the toolbar.

3. Open the Service settingsBefore we start enabling MFA for the users, we first go through the service settings. The button to the settings screen doesn't stand out, but it's just below the title

4. Setup MFA Office 365
A few settings are important here:
* Make sure you check the App password. Otherwise, users can't authenticate in some applications (like the default mail app in Android).
* Also, take a look at the remember function. By default, it is set to 14 days.

5. Enable MFA for Office 365 users
After you have set the settings to your liking click on save and then on users (just below the title Multi-factor authentication).
You see the list of your users again. Here you can select single or multiple users to enable MFA.
At the moment you enable Office 365 MFA for a user it can get the setup screen as soon as the users browse to one of the Office 365 products.

Reference:
https://lazyadmin.nl/office-365/how-to-setup-mfa-in-office-365/

NEW QUESTION 130
You configure Microsoft Azure Active Directory (Azure AD) Connect as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

Reference:
https://docs.microsoft.com/en-us/azure/active-directory/hybrid/how-to-connect-device-writeback

NEW QUESTION 131
Which policies apply to which devices? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

NEW QUESTION 132
You install Azure ATP sensors on domain controllers.
You add a member to the Domain Admins group. You view the timeline in Azure ATP and discover that information regarding the membership change is missing.
You need to meet the security requirements for Azure ATP reporting.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

References:
https://docs.microsoft.com/en-us/azure-advanced-threat-protection/atp-advanced-audit-policy

NEW QUESTION 133
You have a hybrid Microsoft Exchange Server organization. All users have Microsoft 365 E5 licenses.
You plan to implement an Advanced Threat Protection (ATP) anti-phishing policy.
You need to enable mailbox intelligence for all users.
What should you do first?

A. Select Directory extension attribute sync in Microsoft Azure Active Directory Connect (Azure AD Connect)
B. Configure attribute filtering in Microsoft Azure Active Directory Connect (Azure AD Connect)
C. Purchase the ATP add-on
D. Migrate the on-premises mailboxes to Exchange Online

Answer: D

Explanation:
Explanation/Reference:
References:
https://docs.microsoft.com/en-us/office365/securitycompliance/set-up-anti-phishing-policies Implement and manage information protection Testlet 1 This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Overview
Fabrikam, Inc. is manufacturing company that sells products through partner retail stores. Fabrikam has 5,000 employees located in offices throughout Europe.
Existing Environment
Network Infrastructure
The network contains an Active Directory forest named fabrikam.com. Fabrikam has a hybrid Microsoft Azure Active Directory (Azure AD) environment.
The company maintains some on-premises servers for specific applications, but most end-user applications are provided by a Microsoft 365 E5 subscription.
Problem Statements
Fabrikam identifies the following issues:
* Since last Friday, the IT team has been receiving automated email messages that contain "Unhealthy Identity Synchronization Notification" in the subject line.
* Several users recently opened email attachments that contained malware. The process to remove the malware was time consuming.
Requirements
Planned Changes
Fabrikam plans to implement the following changes:
* Fabrikam plans to monitor and investigate suspicious sign-ins to Active Directory
* Fabrikam plans to provide partners with access to some of the data stored in Microsoft 365 Application Administration Fabrikam identifies the following application requirements for managing workload applications:
* User administrators will work from different countries
* User administrators will use the Azure Active Directory admin center
* Two new administrators named Admin1 and Admin2 will be responsible for managing Microsoft Exchange Online only Security Requirements Fabrikam identifies the following security requirements:
* Access to the Azure Active Directory admin center by the user administrators must be reviewed every seven days. If an administrator fails to respond to an access request within three days, access must be removed
* Users who manage Microsoft 365 workloads must only be allowed to perform administrative tasks for up to three hours at a time. Global administrators must be exempt from this requirement
* Users must be prevented from inviting external users to view company data. Only global administrators and a user named User1 must be able to send invitations
* Azure Advanced Threat Protection (ATP) must capture security group modifications for sensitive groups, such as Domain Admins in Active Directory
* Workload administrators must use multi-factor authentication (MFA) when signing in from an anonymous or an unfamiliar location
* The location of the user administrators must be audited when the administrators authenticate to Azure AD
* Email messages that include attachments containing malware must be delivered without the attachment
* The principle of least privilege must be used whenever possible

NEW QUESTION 134
You have a Microsoft 365 subscription.
You are creating a retention policy named Retention1 as shown in the following exhibit.

You apply Retention1 to SharePoint sites and OneDrive accounts.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 135
You need to meet the technical requirements for User9. What should you do?

A. Assign the Privileged administrator role to User9 and configure a mobile phone number for User9
B. Assign the Security administrator role to User9
C. Assign the Global administrator role to User9
D. Assign the Compliance administrator role to User9 and configure a mobile phone number for User9

Answer: C

NEW QUESTION 136
You have a Microsoft Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table.

You create and enforce an Azure AD Identity Protection user risk policy that has the following settings:
* Assignments: Include Group1, Exclude Group2
* Conditions: Sign in risk of Low and above
* Access: Allow access, Require password change
You need to identify how the policy affects User1 and User2.
What occurs when User1 and User2 sign in from an unfamiliar location? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

NEW QUESTION 137
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password

Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
admin@[email protected]
Microsoft 365 Password: &=Q8v@2qGzYz
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support only:
Lab instance: 11032396
You need to ensure that when users tag documents as classified, a classified watermark is applied to the documents.
To complete this task, sign in to the Microsoft Office 365 admin center.

Answer:

Explanation:
1. In the admin center, select the Compliance admin center.
2. Select Classification > Sensitivity labels.
3. Select Create a label, and when the warning appears, select Yes.
4. Enter a Label name, Tooltip, and Description. Select Next.
5. Turn on Encryption. Choose when you want to assign permissions, whether you want your users' access to the content to expire, and whether you want to allow offline access.
6. Select Assign permissions > Add these email addresses or domains.
7. Enter an email address or domain name (such as Contoso.org). Select Add, and repeat for each email address or domain you want to add.
8. Select Choose permissions from preset or custom.
9. Use the drop-down list to select preset permissions, such as Reviewer or Viewer, or select Custom permissions. If you chose Custom, select the permissions from the list. Select Save >Save > Next.
10. Turn on Content marking, and choose the markings you want to use.
11. For each marking that you choose, select Customize text. Enter the text you want to appear on the document, and set the font and layout options. Select Save, and then repeat for any additional markings. Select Next.
12. Optionally, turn on Endpoint data loss prevention. Select Next.
13. Optionally, turn on Auto labeling. Add a condition. For example, under Detect content that contains, select Add a condition. Enter the condition; for example, add a condition that if passport, Social Security, or other sensitive information is detected, the label will be added. Select Next.
14. Review your settings, and select Create. Your label has been created. Repeat this process for any additional labels you want.
15. By default, labels appear in Office apps in this order: Confidential, Internal, and Public. To change the order, for each label, select More actions (the ellipsis), and then move the label up or down. Typically, permissions are listed from the lowest to highest level of permissions.
16. To add a sub-label to a label, select More actions, then Add sub level.
17. When finished, choose Publish labels> Choose labels to publish > Add. Select the labels you want to publish, and then select Add > Done > Next.
18. By default, the new label policy is applied to everyone. If you want to limit who the policy is applied to, select Choose users or groups > Add. Select who you want the policy to apply to, and then select Add > Done
> Next.
19. If you want a default label for documents and email, select the label you want from the drop-down list.
Review the remaining settings, adjust as needed, and then select Next.
20. Enter a Name and Description for your policy. Select Next.
21. Review your settings, then select Publish.
Reference:
https://support.office.com/en-us/article/create-and-manage-sensitivity-labels-2fb96b54-7dd2-4f0c-ac8d-170790d
https://docs.microsoft.com/en-us/microsoft-365/compliance/sensitivity-labels?view=o365-worldwide

NEW QUESTION 138
Which policies apply to which devices? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 139
You have a Microsoft 365 subscription that contains the users shown in the following table.

You implement Azure Active Directory (Azure AD) Privileged Identity Management (PIM).
From PIM, you review the Application Administrator role and discover the users shown in the following table.

The Application Administrator role is configured to use the following settings in PIM:
* Maximum activation duration: 1 hour
* Notifications: Disable
* Incident/Request ticket: Disable
* Multi-Factor Authentication: Disable
* Require approval: Enable
* Selected approver: No results
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

NEW QUESTION 140
You have a Microsoft 365 subscription that uses a default domain name of contoso.com.
Microsoft Azure Active Directory (Azure AD) contains the users shown in the following table.

Microsoft Intune has two devices enrolled as shown in the following table:

Both devices have three apps named App1, App2, and App3 installed.
You create an app protection policy named ProtectionPolicy1 that has the following settings:
* Protected apps: App1
* Exempt apps: App2
* Windows Information Protection mode: Block
You apply ProtectionPolicy1 to Group1 and Group3. You exclude Group2 from ProtectionPolicy1.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

NEW QUESTION 141
An administrator plans to deploy several Azure Advanced Threat Protection (ATP) sensors.
You need to provide the administrator with the Azure information required to deploy the sensors.
What information should you provide?

A. the public key
B. the access key
C. an Azure Active Directory Authentication Library (ADAL) token
D. the URL of the Azure ATP admin center

Answer: D

Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/azure-advanced-threat-protection/workspace-portal

NEW QUESTION 142
You have a Microsoft 365 Enterprise E5 subscription.
You use Windows Defender Advanced Threat Protection (Windows Defender ATP).
You need to integrate Microsoft Office 365 Threat Intelligence and Windows Defender ATP.
Where should you configure the integration?

A. From the Microsoft 365 admin center, select Settings, and then select Services & add-ins.
B. From the Security & Compliance admin center, select Threat management and then select Threat tracker.
C. From the Microsoft 365 admin center, select Security & Compliance.
D. From the Security & Compliance admin center, select Threat management, and then select Explorer.

Answer: D

Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/office365/securitycompliance/integrate-office-365-ti-with-wdatp

NEW QUESTION 143
You have a Microsoft 365 E5 subscription.
All computers run Windows 10 and are onboarded to Windows Defender Advanced Threat Protection (Windows Defender ATP).
You create a Windows Defender machine group named MachineGroupl.
You need to enable delegation for the security settings of the computers in MachineGroupl.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

Explanation

NEW QUESTION 144
You have a Microsoft Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table.

You create and enforce an Azure AD Identity Protection sign-in risk policy that has the following settings:
* Assignments: Include Group1, Exclude Group2
* Conditions: Sign in risk of Low and above
* Access: Allow access, Require password multi-factor authentication
You need to identify how the policy affects User1 and User2.
What occurs when each user signs in from an anonymous IP address? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

NEW QUESTION 145
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft 365 subscription that contains the users shown in the following table.

You discover that all the users in the subscription can access Compliance Manager reports.
The Compliance Manager Reader role is not assigned to any users.
You need to recommend a solution to prevent a user named User5 from accessing the Compliance Manager reports.
Solution: You recommend removing User1 from the Compliance Manager Contributor role.
Does that meet the goal?

A. No
B. Yes

Answer: A

Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/office365/securitycompliance/working-with-compliance-manager

NEW QUESTION 146
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft 365 subscription.
You have a user named User1. Several users have full access to the mailbox of User1.
Some email messages sent to User1 appear to have been read and deleted before the user viewed them.
When you search the audit log in Security & Compliance to identify who signed in to the mailbox of User1, the results are blank.
You need to ensure that you can view future sign-ins to the mailbox of User1.
You run the Set-Maibox -Identity "User1" -AuditEnabled $true command.
Does that meet the goal?

A. No
B. Yes

Answer: B

Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/powershell/module/exchange/mailboxes/set-mailbox?view=exchange-ps

NEW QUESTION 147
You need to ensure that unmanaged mobile devices are quarantined when the devices attempt to connect to Exchange Online.
To complete this task, sign in to the Microsoft 365 portal.

Answer:

Explanation:
See explanation below.
Explanation
You need to configure the Exchange ActiveSync Access Settings.
* Go to the Exchange admin center.
* Click on Mobile in the left navigation pane.
* On the Mobile Device Access Exchange ActiveSync Access Settings
area.
* Select the Quarantine option under When a mobile device that isn't managed by a rule or personal exemption connects to Exchange.
* Optionally, you can configure notifications to be sent to administrators and a message to be sent to the mobile device user when a device is quarantined.
* Click Save to save the changes.

NEW QUESTION 148
You have a Microsoft 365 E5 subscription.
All computers run Windows 10 and are onboarded to Windows Defender Advanced Threat Protection (Windows Defender ATP).
You create a Windows Defender machine group named MachineGroupl.
You need to enable delegation for the security settings of the computers in MachineGroupl.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

Explanation

NEW QUESTION 149
You have a Microsoft 365 tenant.
User attributes are synced from your company's human resources (HR) system to Azure Active Directory (Azure AD).
The company has four departments that each has its own Microsoft SharePoint Online site. Each site must be accessed only by the users from its respective department.
You are designing an access management solution that has the following requirements:
Users must be added automatically to the security group of their department.
All security group owners must verify once quarterly that only the users in their department belong to their group.
Which components should you recommend to meet the requirements? To answer, drag the appropriate components to the correct requirements. Each component may only be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE:Each correct selection is worth one point.

Answer:

Explanation:

Explanation

Reference:
https://cloudbuild.co.uk/tag/create-a-dynamic-security-group-in-azure-ad/
https://docs.microsoft.com/en-us/azure/active-directory/governance/access-reviews-overview

NEW QUESTION 150
You have a Microsoft 365 subscription that contains 1,000 user mailboxes.
An administrator named Admin1 must be able to search for the name of a competing company in the mailbox of a user named User5.
You need to ensure that Admin1 can search the mailbox of User5 successfully. The solution must prevent Admin1 from sending User5.
Solution: You modify the privacy profile, and then create a Data Subject Request (DSR) case.
Does this meet the goal?

A. No
B. Yes

Answer: A

NEW QUESTION 151
You have a Microsoft 365 subscription. Auditing is enabled.
A user named User1 is a member of a dynamic security group named Group1.
You discover that User1 is no longer a member of Group1.
You need to search the audit log to identify why User1 was removed from Group1.
Which two actions should you use in the search? To answer, select the appropriate activities in the answer area.
NOTE: Each correct selection is worth one point.