Ultimate Guide to Prepare 350-401 with Accurate PDF Questions [Mar 05, 2025]
Pass Cisco With ValidExam Exam Dumps
NEW QUESTION # 623
Drag and drop the snippets onto the blanks within the code to create an EEM script that adds an entry to a locally stored text file with a timestamp when a configuration change is made. Not all options are used.
Answer:
Explanation:
Explanation:
NEW QUESTION # 624
What is a characteristic of the overlay network in the Cisco SD-Access architecture?
- A. It provides isolation among the virtual networks and independence from the physical network.
- B. It consists of a group of physical routers and switches that are used to maintain the network.
- C. It provides multicast support to enable Layer 2 flooding capability in the underlay network.
- D. It uses a traditional routed access design to provide performance and high availability to the network.
Answer: A
NEW QUESTION # 625 
Refer to the exhibit. Which two commands are needed to allow for full reachability between AS 1000 and AS 2000? (Choose two)
- A. R1#no network 10.0.0.0 255.255.255.0
- B. R1#network 19.168.0.0 mask 255.255.0.0
- C. R2#network 209.165.201.0 mask 255.255.192.0
- D. R2#no network 10.0.0.0 255.255.255.0
- E. R2#network 19.168.0.0 mask 255.255.0.0
Answer: D,E
NEW QUESTION # 626
Which statement about Cisco EAP-FAST is true?
- A. It does not require a RADIUS server certificate.
- B. It is an IETF standard.
- C. It operates in transparent mode.
- D. It requires a client certificate.
Answer: A
Explanation:
Explanation
The EAP-FAST protocol is a publicly accessible IEEE 802.1X EAP type that Cisco developed to support customers that cannot enforce a strong password policy and want to deploy an 802.1X EAP type that does not require digital certificates.
EAP-FAST is also designed for simplicity of deployment since it does not require a certificate on the wireless LAN client or on the RADIUS infrastructure yet incorporates a built-in provisioning mechanism.
Reference:
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-fixed/72788-CSSC-Deployment-Guide.h
NEW QUESTION # 627
Drag and drop the characteristics from the left onto the infrastructure deployment models they describe on the right.
Answer:
Explanation:
NEW QUESTION # 628
Refer to the exhibit.
What is the effect of the configuration''
- A. The device will authenticate all users connecting to vty lines 0 through 4 against TACACS+
- B. The device will allow only users at 192 168.0.202 to connect to vty lines 0 through 4
- C. When users attempt to connect to vty lines 0 through 4. the device will authenticate them against TACACS* if local authentication fails
- D. The device will allow users at 192.168.0.202 to connect to vty lines 0 through 4 using the password ciscotestkey
Answer: A
NEW QUESTION # 629
Refer to the exhibit.
An engineer is installing a new pair of routers in a redundant configuration. Which protocol ensures that traffic is not disrupted in the event of a hardware failure?
- A. VRRP
- B. GLBP
- C. HSRPv1
- D. HSRPv2
Answer: C
Explanation:
The virtual MAC address is 0000.0c07.acXX (XX is the hexadecimal group number) so it is using HSRPv1.
Note: HSRP Version 2 uses a new MAC address which ranges from 0000.0C9F.F000 to 0000.0C9F.FFFF.
NEW QUESTION # 630
Refer to the exhibit. What is required to configure a second export destination for IP address
192.168.10.1?
- A. Configure a version 5 flow-export to the same destination.
- B. Specify a different flow ID
- C. Specify a different UDP port.
- D. Specify a VRF.
- E. Specify a different TCP port.
Answer: C
Explanation:
To configure multiple NetFlow export destinations to a router, use the following commands in global configuration mode:
Step 1: Router(config)# ip flow-export destination ip-address udp-port
Step 2: Router(config)# ip flow-export destination ip-address udp-port
The following example enables the exporting of information in NetFlow cache entries:
ip flow-export destination 10.42.42.1 9991 ip flow-export destination 10.0.101.254 1999 Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/12s_mdnf.html
NEW QUESTION # 631
Refer to the exhibit.
Which configuration must be applied to the HQ router to set up a GRE tunnel between the HQ and BR routers?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
Explanation:
Explanation
https://community.cisco.com/t5/networking-documents/how-to-configure-a-gre-tunnel/ta-p/3131970#toc-hId--14
NEW QUESTION # 632
Refer to the exhibit.
Which statement about the OPSF debug output is true?
- A. The output displays OSPF hello messages which router R1 has sent received on interface Fa0/1.
- B. The output displays all OSPF messages which router R1 has sent to received on interface Fa0/1.
- C. The output displays all OSPF messages which router R1 has sent or received on all interfaces.
- D. The output displays OSPF hello and LSACK messages which router R1 has sent or received.
Answer: A
Explanation:
Explanation
This combination of commands is known as "Conditional debug" and will filter the debug output based on your conditions. Each condition added, will behave like an 'And' operator in Boolean logic. Some examples of the "debug ip ospf hello" are shown below:
NEW QUESTION # 633
Drag and drop the wireless elements on the left to their definitions on the right.
Answer:
Explanation:
Explanation:
NEW QUESTION # 634
Which DHCP option provides the CAPWAP APs with the address of the wireless controller(s)?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation
NEW QUESTION # 635
Refer to the exhibit.
Which configuration change ensures that R1 is the active gateway whenever it is in a functional state for the
172.30.110.0724 network?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: D
NEW QUESTION # 636
What is the purpose of an integration API in Cisco DNA Center?
- A. Obtain information about clients, sites, and topology from Cisco DNA Center.
- B. Allow the platform into approval chains in ITSM.
- C. Enable external systems to take actions in response to an event.
- D. Enable discovery and control of the network by using HTTPS verbs.
Answer: C
Explanation:
https://developer.cisco.com/docs/dna-center/#!cisco-dna-center-platform-overview/integration- api-westbound
NEW QUESTION # 637 
Refer to the exhibit. An engineer is reaching network 172.16.10.0/24 via the R1-R2-R4 path. Which configuration forces the traffic to fake a path of R1-R3-R4?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
The configuration provided in the OCR text shows the use of a route map named RM_LOCAL_PREF to set the local preference for BGP routes received from the neighbor 13.13.13.3. By setting a higher local preference, the BGP best path selection process will prefer routes with a higher local preference value.
Therefore, to force traffic to take the path R1-R3-R4, the local preference for routes received from R3 should be increased, making them more preferred than the current path via R2.
NEW QUESTION # 638
Drag and drop the threat defense solutions from the left onto their descriptions on the right.
Answer:
Explanation:
Explanation
NEW QUESTION # 639
Refer to the exhibit. An engineer must prevent VLAN 20 routes from appearing in the routing table of Switch-1. Which command set must be applied?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 640
How does the EIGRP metric differ from the OSPF metric?
- A. The EIGRP metric is calculated based on bandwidth only. The OSPF metric is calculated on delay only.
- B. The EIGRP metric is calculated based on delay only. The OSPF metric is calculated on bandwidth and delay.
- C. The EIGRP metric Is calculated based on bandwidth and delay. The OSPF metric is calculated on bandwidth only.
- D. The EIGRP metric Is calculated based on hop count and bandwidth. The OSPF metric is calculated on bandwidth and delay.
Answer: C
Explanation:
EIGRP (Enhanced Interior Gateway Routing Protocol) uses a composite metric that considers both bandwidth and delay to determine the best path for routing traffic. This metric is calculated using a complex formula that includes these two main components, among others. OSPF (Open Shortest Path First), on the other hand, uses a simpler metric that is based solely on bandwidth. The cost of an OSPF route is inversely proportional to the bandwidth of the link, with higher bandwidth links having a lower cost.
NEW QUESTION # 641
......
Latest 350-401 Exam Dumps - Valid and Updated Dumps: https://www.validexam.com/350-401-latest-dumps.html
Fully Updated 350-401 Dumps - 100% Same Q&A In Your Real Exam: https://drive.google.com/open?id=1EysMDswdLhNqJUQmVI9AWtFhH3K-gLzW