[May 04, 2025] New Updated D-PSC-MN-01 Exam Questions 2025
Updated Free EMC D-PSC-MN-01 Test Engine Questions with 150 Q&As
EMC D-PSC-MN-01 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 76
What phase is crucial in the initial setup of a PowerScale cluster to ensure successful installation and deployment?
- A. Validating hardware and software compatibility
- B. Assessing network infrastructure
- C. Implementing cluster management tools
- D. Configuring data protection levels
Answer: A
NEW QUESTION # 77
What is a crucial step when installing subcomponents in a PowerScale rack?
- A. Configuring the network settings for each subcomponent
- B. Testing each subcomponent individually before installation
- C. Following the manufacturer's recommended sequence for installation
- D. Documenting the serial numbers of all components
Answer: C
NEW QUESTION # 78
Which service procedure can be performed on a Dell PowerScale Gen 6 node without first having to power it down?
- A. Reseat Gen 6 node
- B. Replace FRU component
- C. Replace CRU component
- D. Reseat network cable
Answer: C
NEW QUESTION # 79
A platform engineer needs to gather information about the configuration of a Dell PowerScale cluster. They are specifically interested in knowing which features are affected by upgrading firmware on a subset of the nodes.
Which command does the engineer need to execute?
- A. isi_upgrade_helper
- B. isi upgrade cluster view
- C. isi upgrade cluster list
- D. isi_gather_info
Answer: A
NEW QUESTION # 80
A platform engineer plans to upgrade Dell PowerScale OneFS.
Which action must they consider during the pre-upgrade phase?
- A. Check supportability and compatibility requirements
- B. Update firmware
- C. Install recommended patches
- D. Implement OneFS API
Answer: B
NEW QUESTION # 81
After a node is serviced and ready for operation, which steps are crucial to reintegrate it into the cluster? (Select two)
- A. Synchronizing the node's clock with the cluster
- B. Assigning the node to the correct IP pool
- C. Ensuring the node's firmware is up to date
- D. Configuring the node's network settings
Answer: C,D
NEW QUESTION # 82
What are essential preliminary tasks before starting hardware maintenance on a PowerScale cluster?
- A. Verifying the cluster's health status
- B. Documenting the existing cabling setup
- C. Ensuring all nodes are powered off
- D. Backing up the cluster configuration
Answer: A,B,D
NEW QUESTION # 83
Refer to the exhibit.
A platform engineer has connected power cables to a Dell EMC PowerScale.
- A. Cold and redundant
- B. Not functioning
- C. Warning event
- D. On and healthy
Answer: D
Explanation:
In the exhibit, the status indicators show:
* AC (Alternating Current):A green light indicating the PowerScale system is receiving power from the AC input, which means it is powered on.
* DC (Direct Current):The absence of a lit DC indicator means that the system is not currently converting AC power to DC power, but this does not indicate an issue with functionality based on this view.
Given that the AC light is green, the system is powered and functioning as expected. Therefore, the system is
"On and healthy" based on the AC input, makingB. On and healthythe correct answer.
NEW QUESTION # 84
What is the primary purpose of maintaining Customer Replaceable Units (CRUs) in a PowerScale environment?
- A. To enhance the node's storage capacity
- B. To comply with software licensing requirements
- C. To upgrade the system's performance
- D. To ensure high availability and reliability
Answer: D
NEW QUESTION # 85
A platform engineer needs to study the solution diagrams and topologies.
What should the engineer consult?
- A. Site Preparation and Planning Guide
- B. PEQ
- C. Dell EMC support
- D. SolVe Online
Answer: D
Explanation:
When a platform engineer needs to study solution diagrams and network topologies for Dell EMC PowerScale systems, the most appropriate resource isSolVe Online.
Key Points:
* SolVe Online:
* An interactive platform provided by Dell EMC.
* Contains detailed solution diagrams, topologies, and step-by-step procedures.
* Offers comprehensive guides for installation, configuration, and maintenance tasks.
Why Option D is Correct:
* Access to Diagrams and Topologies:
* SolVe Online includes up-to-date diagrams that illustrate hardware setups and network configurations.
* Official Resource:
* Provides validated and approved information from Dell EMC.
* User-Friendly Interface:
* Allows engineers to navigate through various scenarios and access the needed documentation quickly.
Why Other Options Are Incorrect:
* Option A (PEQ):
* The Pre-Engagement Questionnaire is used to collect customer requirements and does not contain solution diagrams.
* Option B (Site Preparation and Planning Guide):
* While it provides environmental and site requirements, it may not include detailed solution diagrams and topologies.
* Option C (Dell EMC support):
* While support can provide assistance, SolVe Online is the direct resource for diagrams.
Dell PowerScale References:
* Accessing SolVe Online:
* Visit the SolVe Online portal at https://solveonline.emc.com.
* Requires a Dell EMC account with appropriate permissions.
* Features of SolVe Online:
* Solution Diagrams:
* Visual representations of system architectures.
* Topologies:
* Detailed layouts of network connections and node arrangements.
* Guided Procedures:
* Step-by-step instructions for various tasks.
Best Practices:
* Stay Updated:
* Regularly check SolVe Online for the latest documentation and updates.
* Use Filters:
* Utilize search and filtering options to find specific diagrams relevant to your system.
* Training:
* Familiarize yourself with SolVe Online to enhance efficiency during planning and implementation.
NEW QUESTION # 86
During the replacement of a failed hard drive, a key FRU, what steps should be followed to ensure proper installation?
- A. Confirming the slot and drive compatibility
- B. Ensuring the node is isolated from the network
- C. Verifying the drive firmware version matches the cluster
- D. Performing a full data backup
Answer: A,C
NEW QUESTION # 87
A platform engineer needs to replace the fan on Dell PowerScale Gen 6 hardware.
Where can they find the fan module?
- A. Compute module
- B. Suitcase
- C. Midplane
- D. Front panel
Answer: A
NEW QUESTION # 88
During a PowerScale cluster expansion, what factors must be considered to maintain balance?
- A. Power and cooling requirements
- B. Storage and compute node ratios
- C. Network throughput and latency
- D. Data distribution and redundancy settings
Answer: B,C
NEW QUESTION # 89
A platform engineer plans to set up a rack system for a Dell PowerScale cluster installation.
What is a requirement for the initial setup?
- A. The rack cabinet must have at least dual power supplies with power distribution.
- B. Power cords must be connected to four power distribution units within the rack cabinet.
- C. The rack system must have twelve independent 200-240 V power sources.
- D. Grounding lugs must be used for internal grounding within the chassis.
Answer: A
NEW QUESTION # 90
Which aspect is crucial when cabling nodes in a PowerScale installation?
- A. Using color-coded cables for easy identification
- B. Documenting the cabling layout
- C. Ensuring cables are of the minimum required length
- D. Verifying cable integrity with testing tools
Answer: B
NEW QUESTION # 91
......
Try 100% Updated D-PSC-MN-01 Exam Questions [2025]: https://www.validexam.com/D-PSC-MN-01-latest-dumps.html
The Best Dell Storage D-PSC-MN-01 Professional Exam Questions: https://drive.google.com/open?id=1IbnspnJcaBrxIf5HY7I0GmegkGfaDYTO