[Jan 11, 2022] Dumps Collection JN0-362 Test Engine Dumps Training With 67 Questions

Juniper JN0-362 Dumps - 100% Cover Real Exam Questions

NEW QUESTION 35
Which two Layer 2 protocols are supported on MX Series devices? (Choose two.)

• A. RIP
• B. RSTP
• C. MSTP
• D. BGP

Answer: B,C

 

NEW QUESTION 36
Which configuration can be applied to ensure that no more than 600 MAC addresses are learned by a virtual switch?

• A. Option D
• B. Option A
• C. Option C
• D. Option B

Answer: D

 

NEW QUESTION 37
Which three statements are true about GRES? (Choose three.)

• A. Interface information is preserved.
• B. Kernel information is preserved.
• C. GRES requires redundant REs.
• D. Control plane information is preserved.
• E. GRES requires only one RE.

Answer: A,B,C

 

NEW QUESTION 38
Click the Exhibit button.

Customer-1 wants the Service Provider to allow STP to operate normally on all ports but only allow the MX Series devices to manage the Layer 2 topology.
Referring to the exhibit, which feature needs to be implemented on all devices to accomplish this task?

• A. BPDU protection
• B. root protection
• C. loop protection
• D. MAC movement protection

Answer: C

 

NEW QUESTION 39
Click the Exhibit button.

Referring to the exhibit, the GRE tunnel between R-1 and R-2 allows connectivity between User-1 and Server-1. When User-1 communicates with Server-2 with packets that are 1472 bytes in size, no packet fragmentation occurs. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size with no packet fragmentation. However, if the packet size is larger than 1448 bytes, packet fragmentation occurs.
Why is the packet fragmentation occurring between User-1 and Server-1 in this scenario?

• A. The IP header adds 20 bytes to the packet
• B. The GRE header adds 24 bytes to the packet
• C. The GRE header adds 20 bytes to the packet
• D. The IP header adds 24 bytes to the packet

Answer: B

 

NEW QUESTION 40
What is the Junos default router priority advertisement value for IS-IS?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: B

Explanation:
Reference:
%20of%2064.

 

NEW QUESTION 41
Click the Exhibit button.

Referring to the exhibit, which statement is correct?

• A. Routes from 10.1.1.1 are less preferred than the default local preference
• B. Routes from 10.1.1.1 are less preferred than routes from 10.2.2.2
• C. Routes from 10.3.3.3 are less preferred than the default local preference
• D. Routes from 10.2.2.2 are less preferred than routes from 10.1.1.1

Answer: D

 

NEW QUESTION 42
Click the Exhibit button.

Referring to the exhibit, which statement is true?

• A. The router will prune links with insufficient bandwidth from the path before beginning the signaling process
• B. The router will precalculate a valid path through the network for LSP r1-to-r3
• C. The router will analyze the traffic engineering database to determine the best path through the network
• D. The router will attempt to signal the LSP along the IGP shortest path to 192.168.100.1

Answer: A

 

NEW QUESTION 43
You have been asked to identify what the contributing routes are for route 204.7.15/21.Which command will show this information?

• A. show route 204.7.15/21 exact summary
• B. show route 204.7.15/21
• C. show route 204.7.15/21 detail
• D. show route 204.7.15/21 extended

Answer: C

 

NEW QUESTION 44
Which two IS-IS packet types are used to maintain IS-IS database synchronization? (Choose two.)

• A. IIH
• B. PSNP
• C. LSP
• D. CSNP

Answer: B,D

 

NEW QUESTION 45
Click the Exhibit.


Referring to the exhibit, which statement is correct about MVRP?

• A. AS1's VLAN ID list is missing an entry for VLAN 300.
• B. AS1 is not allowing ES2 access to VLAN 300.
• C. ES1 is not advertising VLAN 300 to AS1.
• D. ES2 is not interested in VLAN 300.

Answer: D

 

NEW QUESTION 46
Click the Exhibit button. In the exhibit, all routers are sending routes to Router B

Which routes will be advertised from Router B to Router D?

• A. BGP routes learned from Router E only
• B. BGP routes learned from Router A only
• C. BGP routes learned from Routers A and C only
• D. BGP routes learned from Routers A, C and E only

Answer: D

 

NEW QUESTION 47
You are asked to configure and apply a new routing policy to influence routing advertisements received from a specific EBGP peer.
In this scenario, which statement is true?

• A. The new policy should be applied as an export for the EBGP group in which the peer is defined.
• B. The new policy should be applied as an import policy for the specific EBGP peer.
• C. The new policy should be applied as an import policy for the EBGP group in which the peer is defined.
• D. The new policy should be applied as an export policy for the specific EBGP peer.

Answer: B

 

NEW QUESTION 48
Which standards-based election protocol facilities redundancy in a LAN environment by eliminating a single point failure through the use of master and backup routers?

• A. BFD
• B. ISSU
• C. VRRP
• D. graceful restart

Answer: C

 

NEW QUESTION 49
When working with an MPLS LSP, what will the install 172.16.6.0/24 active command accomplish?

• A. The command will swap the prefix from inet.0 to inet.3
• B. The command will swap the prefix from inet.3 to inet.0
• C. The command will install the prefix in inet.0 rather than inet.3
• D. The command will install the prefix in inet.3 rather than inet.0

Answer: D

 

NEW QUESTION 50
You have configured multiple IP-IP tunnels across your network to provide connectivity to remote sites.Which technique is used to help the IP endpoints in your network determine the optimal packet size to send across your tunnels?

• A. path MTU discovery
• B. end-to-end MTU discovery
• C. fragmentation discovery
• D. packet throughput discovery

Answer: A

 

NEW QUESTION 51
Your customer complains that their Layer 3 VPN is not passing traffic from one site to another. You assigned that customer to VPN-A. Which command on the PE router will confirm the presence of customer routes?

• A. show route table inet.3 VPN-A
• B. show route VPN-A table bgp.l2vpn.0
• C. show route table VPN-A.inet.0
• D. show route VPN-A

Answer: C

 

NEW QUESTION 52
To which multicast address is a VRRP advertisement packet sent?

• A. 224.0.0.6
• B. 224.0.0.18
• C. 224.0.0.13
• D. 224.0.0.22

Answer: B

Explanation:
Explanation/Reference: https://tools.ietf.org/html/rfc3768

 

NEW QUESTION 53
An Ethernet bridge is configured such that all interfaces are in a single broadcast domain By default.
Which two tasks does the bridge perform in response to receiving a multicast frame? (Choose two)

• A. It floods the frame out of particular interfaces based on its multicast MAC table
• B. It floods the frame out of all interfaces except the one on which it was received
• C. It learns the source MAC address
• D. It drops the frame

Answer: B,C

 

NEW QUESTION 54
Click the Exhibit button.

Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)

• A. to reduce the risk of forwarding traffic through a stateless tunnel
• B. to mark the tunnel up after the hold-time expires
• C. to mark the tunnel down after the hold-time expires
• D. to remove the tunnel interface from inet.0 after the hold-time expires

Answer: A,C

 

NEW QUESTION 55
......

Understanding functional and technical aspects of Layer 2 Bridging or VLANS

The following will be discussed in JN0-362 dumps:

• VLANs
• Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
• Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
• Port modes
• Identify the concepts, benefits, operation, or functionality of Spanning Tree Protocol and its variants
• Port roles and states
• Virtual Switches
• Provider bridging (for example, Q-in-Q Tunneling)
• Spanning-Tree Protocols
• Service provider switching platforms
• MVRP
• STP, RSTP, MSTP and VSTP concepts
• MPLS and routing tables
• Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
• MPLS packet header
• End-to-end packet flow and forwarding
• BPDU, loop, and root protection
• Demonstrate knowledge of how to configure, monitor, or troubleshoot STP and its variants
• Frame processing
• Tagging
• Provider bridging
• MPLS terminology
• IRB
• MVRP
• Spanning-tree protocols: STP, RSTP, MSTP, and VSTP
• Labels and the label information base
• LDP
• Convergence and reconvergence
• Multiprotocol Label Switching (MPLS)
• BPDUs
• Identify the concepts, benefits, or functionality of VLANs
• MPLS forwarding
• RSVP-signaled and LDP-signaled LSPs
• Bridging elements and terminology
• Interfaces and ports
• RSVP
• Identify the concepts, operation, or functionality of MPLS
• Spanning-tree security
• IRB

 

Realistic ValidExam JN0-362 Dumps PDF - 100% Passing Guarantee: https://www.validexam.com/JN0-362-latest-dumps.html