2026 Updated Verified 3V0-22.25 Downloadable Printable Exam Dumps

The Ultimate VMware 3V0-22.25 Dumps PDF Review

NEW QUESTION # 124
A customer asks if they can mix "Small" and "Medium" nodes in the same VCF Operations for Logs cluster to save costs during an expansion.
# Scenario
Existing: 3 x Medium Nodes
Proposed: Add 2 x Small Nodes
What is the correct architectural guidance?

• A. Yes, but the Small nodes can only be used as "Query Nodes", not "Ingestion Nodes".
• B. No, mixing node sizes is not supported. The cluster performance is dictated by the smallest node, and imbalance can cause ingestion queues to fill up on smaller nodes, causing dropped events for the whole cluster.
• C. Yes, mixing sizes is fully supported and recommended for tiering.
• D. No, unless "Storage Tiering" is enabled.

Answer: B

NEW QUESTION # 125
A Cloud Admin needs to assess the cost and capacity impact of migrating 500 VMs from an on- premises VCF environment to "VMware Cloud on AWS" (VMC).
Which VCF Operations feature provides the specific cost comparison and node-count recommendation for this public cloud migration?

• A. The "Cost Drivers" page.
• B. The "Reclaim" workbench.
• C. The "Migration Planning" scenario within the What-If Analysis workbench.
• D. The standard "Workload Planning" scenario.

Answer: C

NEW QUESTION # 126
A VCF Operator is investigating a storage outage. The raw logs show cryptic messages like:
ScsiDeviceIO: 2338: Cmd(0x439d4) 0x1a, CmdSN 0x0 from world 0 to dev "naa.600..." failed H:0x0 D:0x2 P:0x0 The operator struggles to understand what H:0x0 D:0x2 means.
How does VCF Operations for Logs primarily assist in decoding these technical error codes for faster root cause analysis?

• A. The VMware vSphere Content Pack automatically parses these hex codes into human-readable Extracted Fields (e.g., scsi_sense_code, scsi_host_status), often creating a summary field like "Check Condition" or mapping them to specific "Storage Error" event types.
• B. It uses AI to rewrite the log in English.
• C. It opens a support ticket with the storage vendor automatically.
• D. It highlights the text in red but offers no translation.

Answer: A

NEW QUESTION # 127
An admin runs a What-If Analysis to remove a Host from a cluster to simulate a hardware refresh cycle. The result shows a "Capacity Shortfall" of 10% for Memory.
What does this result imply for the operational plan?

• A. The host can be removed, but users will experience slow performance.
• B. The host cannot be safely removed without violating the capacity policy (Buffers/HA). The remaining hosts do not have enough "Usable Memory" to run the existing workloads while satisfying the configured admission control and risk buffers.
• C. The host can be removed, but VCF Operations will automatically disable HA to make it fit.
• D. The host can be removed safely because the shortfall is within the 10% buffer.

Answer: B

NEW QUESTION # 128
Which metric does VCF Operations primarily use to determine if a VM is "Powered Off" for the purpose of reclamation?

• A. sys|poweredOffTime (or System|Powered Off Time). This counter tracks the duration (in seconds/minutes/days) since the VM's power state last transitioned to "Off".
• B. disk|iops
• C. cpu|usage_average
• D. sys|uptime

Answer: A

NEW QUESTION # 129
Which specific prerequisite must be verified before running the "Add Node" wizard in the VCF Operations Administration UI?

• A. The new node must already have a valid license key applied via CLI.
• B. The new node VM must be powered off.
• C. The Master Node must be in Maintenance Mode.
• D. The new node must be deployed, powered on, and the "Initial Setup Wizard" (Install/Expand/New) must be waiting at the "Get Started" screen; it should not yet be configured as a standalone cluster.

Answer: D

NEW QUESTION # 130
In the Capacity Projection chart, what does the "Confidence Band" (the shaded area around the projection line) represent?

• A. The amount of disk space that can be reclaimed.
• B. The cost of the hardware.
• C. The historical data points.
• D. The statistical probability range of the forecast. A wider band indicates lower confidence (more volatility/unpredictability), meaning the resource might run out sooner or later than the specific predicted date. A narrow band indicates high confidence (stable trend).

Answer: D

NEW QUESTION # 131
A customer has a 3-node VCF Operations cluster (1 Master, 1 Replica, 1 Data). They plan to expand the cluster by adding 3 more nodes to handle increased object growth.
# Current State
Nodes: 3
HA: Enabled
# Target State
Nodes: 6
HA: Enabled
What is the operational impact of adding these new "Data" nodes on the cluster's storage and compute capacity?

• A. The cluster automatically requires a reboot of the Master node to recognize the new capacity.
• B. The storage capacity increases, but the compute capacity for processing metrics remains fixed at the Master node's limit.
• C. The new nodes act only as standby targets; they do not process data until a failure occurs.
• D. The cluster's total compute and storage capacity increases linearly, and the existing data/compute workload is automatically rebalanced (sharded) across all 6 nodes.

Answer: D

NEW QUESTION # 132
A user views a dashboard containing a "Event List" (Table) widget. They want to see the "Source IP" column in the table, but currently, only "Timestamp" and "Text" are shown.
How can the user add this column to the widget view?

• A. In the widget editor (or Interactive Analytics view), expand the "Fields" pane on the left (or use the Field visibility selector above the table), locate "source_ip", and ensure it is checked/added to the table columns view. Then save the widget.
• B. Double-click the timestamp.
• C. It is not possible; table widgets are fixed.
• D. Use a regex to rewrite the text.

Answer: A

NEW QUESTION # 133
A Cloud Admin wants to configure "Workload Optimization" to automatically balance workloads across clusters based on software licensing costs. Specifically, "Oracle" VMs must strictly stay on "Cluster-A" (which is licensed), and "SQL" VMs must stay on "Cluster-B".
Which VCF Operations feature is designed to enforce these license-based placement constraints?

• A. The "Consolidate" Operational Intent.
• B. Business Intent (within Workload Optimization). The admin configures tag-based placement rules (e.g., Tag 'Oracle' must be placed on Cluster 'Cluster-A') which VCF Operations enforces during any rebalancing action.
• C. vSphere DRS Affinity Rules created manually in vCenter.
• D. The "Cost Drivers" configuration screen.

Answer: B

NEW QUESTION # 134
Which VCF Operations feature allows an administrator to retain statistical summaries (e.g., Monthly Maximum, Monthly Average) of metrics for 5 years, while deleting the raw 5-minute data points after 6 months to save space?

• A. The "Data Aging" Service
• B. The "Extended Metrics" feature (if configured for roll-ups).
• C. Super Metric Formulas
• D. Metric Roll-up / Archival

Answer: D

NEW QUESTION # 135
A VCF Operations administrator wants to ensure that a specific group of users ("Auditors") can view all metrics but cannot accidentally dismiss alerts or cancel running tasks.
# Role Configuration
Role Name: Auditor-Role
Base Permissions: Read-Only
# Specific Constraint
Ensure "Cancel Action" and "Cancel Alert" are strictly forbidden.
When configuring the role permissions, which state indicates that a permission is explicitly denied and cannot be inherited?

• A. Checkbox is Unchecked (Empty).
• B. The permission is set to "Null".
• C. Checkbox is Checked (Green).
• D. There is no explicit deny; absence of the permission (Unchecked) acts as a deny.

Answer: D

NEW QUESTION # 136
A security team is reviewing the network design for a new Cloud Proxy deployment in a highly restricted "DMZ" data center. They are questioning the firewall rules required for the Cloud Proxy to communicate with the internal VCF Operations cluster.
# Proposed Rule Set
1. Source: Cloud Proxy (DMZ) -> Dest: VCF Ops Cluster (Internal) | Port: 443 | Action: Allow
2. Source: VCF Ops Cluster (Internal) -> Dest: Cloud Proxy (DMZ) | Port: 443 | Action: Allow
3. Source: Cloud Proxy (DMZ) -> Dest: VCF Ops Cluster (Internal) | Port: 22 | Action: Deny Which feedback should the VCF Architect provide to the security team regarding this rule set?

• A. Rule #2 is unnecessary and should be removed. The Cloud Proxy architecture relies on a "One-Way Outbound" connection initiated by the Proxy to the Cluster. The Cluster does not need to initiate connections into the DMZ.
• B. The design is perfect; bidirectional HTTPS is required for heartbeat exchange.
• C. Rule #3 is incorrect; Port 22 must be open for the Cluster to push upgrade binaries to the Proxy.
• D. A new rule must be added to allow Port 80 for insecure bootstrap.

Answer: A

NEW QUESTION # 137
An operator attempts to add a new Cloud Proxy to an existing Collector Group but receives an error:
"Incompatible Version".
# Inventory
Collector Group: Ver 8.10.1 (Contains 2 Proxies)
New Proxy: Ver 8.12.0
What is the root cause and resolution?

• A. All Cloud Proxies in a Collector Group must be at the exact same version (and usually match the Analytics Cluster version). The operator must upgrade the existing group members (or downgrade the new one, though typically upgrading the cluster/group is the path) to match before adding.
• B. The new Proxy has a different IP subnet, which is not allowed.
• C. The Collector Group is locked; the operator must "Unlock" it in the Global Settings.
• D. The new Proxy is too new; Collector Groups only support "Standard" editions, not "Advanced".

Answer: A

NEW QUESTION # 138
A Cloud Architect is designing a new Workload Domain configuration to optimize resource usage.
The design requires the new domain to leverage the existing NSX Manager cluster deployed in the Management Domain ("Shared NSX" model). (Choose 2.)
# Architecture Decision
Target Domain: Linux-Dev-WLD
Network Model: Shared NSX (1:Many)
Source NSX: sfo-m01-nsx-cluster
# Configuration Panel
[ ] Deploy NSX Controllers
[ ] Create New Transport Zone
[ ] Connect to Existing NSX Manager
[ ] Deploy NSX Edge Nodes
Which operational implications will result from this configuration?

• A. The Linux-Dev-WLD will share the same Transport Zones and Network Profiles defined in the Management Domain's NSX instance.
• B. A separate vCenter Server will typically NOT be deployed for the Linux-Dev-WLD; it will use the Management vCenter.
• C. Lifecycle management (upgrades) of the NSX instance will effectively upgrade the networking control plane for both the Management Domain and the Linux-Dev-WLD simultaneously.
• D. The Linux-Dev-WLD must reside in the same physical rack as the Management Domain to support Layer 2 adjacency.

Answer: A,C

NEW QUESTION # 139
To configure a "Reclaim Resources" job for Idle Virtual Machines, which specific criterion must be defined in the job setup to determine what qualifies as "Idle"?

• A. The job configuration does not define "Idle"; it relies on the global "Reclaimable Capacity" criteria settings configured in the VCF Operations Policy or Global Settings (e.g., CPU < 100MHz for 7 Days).
• B. The CPU Ready time % threshold.
• C. The user must upload a CSV list of idle VMs.
• D. The "Tag" assigned to the VM.

Answer: A

NEW QUESTION # 140
A Cloud Admin is designing a monitoring strategy for a new VCF environment with one Management Domain and three Workload Domains. The goal is to centralize visibility while adhering to the standard VCF Operations architecture.
# Deployment Specifications
Site: Primary Data Center (SFO)
Management Domain: sfo-m01
Workload Domain 1: sfo-w01 (General Compute)
Workload Domain 2: sfo-w02 (VDI)
Workload Domain 3: sfo-w03 (Database)
# Requirement
"All metrics from all domains must be analyzed by a single VCF Operations cluster residing in the Management Domain." Which configuration steps must be taken to meet this requirement? (Choose 2.)

• A. Deploy the VCF Operations cluster into the sfo-m01 vSphere cluster.
• B. Configure the VCF Operations instance to integrate with the vCenter Servers of sfo-m01, sfo-w01, sfo-w02, and sfo-w03.
• C. Deploy a separate VCF Operations cluster in sfo-w02 specifically for VDI monitoring and peer it with the main cluster.
• D. Install the SDDC Manager agent on all VMs in sfo-w03 to push metrics to the Management Domain.

Answer: A,B

NEW QUESTION # 141
A Security Auditor wants to review all logs where a specific field user_id is present in the log entry, regardless of what the actual user ID value is. This is to identify all authenticated activities.
Which filter operator supports this requirement?

• A. is not null (This is SQL syntax, not typically the UI label in Log Insight).
• B. exists. The administrator selects the field user_id and chooses the operator exists. This filters the view to show only those log events where the parser successfully extracted a value for that field.
• C. contains "*"
• D. starts with "user"

Answer: B

NEW QUESTION # 142
A Security Auditor asks for a report of all users who have logged into the VCF Operations UI in the last 7 days.
# Requirement
- Source IP
- Username
- Login Time
- Status (Success/Failure)
Which feature should the operator use to retrieve this data?

• A. The "Audit" page under Administration -> Management -> Audit in VCF Operations.
• B. The audit.log file stored on the Master Node's filesystem (accessed via SSH).
• C. The "System Audit" dashboard in VCF Operations for Logs.
• D. The "User Access Report" in SDDC Manager.

Answer: A

NEW QUESTION # 143
A CIO asks the operations team to provide a "Green Score" dashboard to track the environmental efficiency and power consumption of the VCF data centers.
# Requirement
- Track Power Usage Effectiveness (PUE)
- Identify "Zombie" VMs wasting energy
- Quantify Carbon Footprint savings from reclamation
Which VCF component has a native "Sustainability" page and metric set to provide this data?

• A. VCF Operations for Networks
• B. VCF Operations
• C. SDDC Manager
• D. VMware Aria Suite Lifecycle

Answer: B

NEW QUESTION # 144
A security engineer constructs a query to detect "SQL Injection" attempts using a complex Regular Expression (Regex). They verify the regex works in the search bar.
What is the best way to reuse this regex logic in future queries and dashboards without retyping it every time?

• A. Create an Extracted Field. By saving the regex as a named Field (e.g., sql_query_string), the system parses it automatically. In the future, the engineer can simply drag and drop the sql_query_string field into filters or aggregations, treating it like a native property.
• B. Create a "Saved Search".
• C. Email the regex to the team.
• D. Save it as a text file on the desktop.

Answer: A

NEW QUESTION # 145
An organization uses Infoblox to manage IP addresses across the enterprise. They require VCF Automation to automatically request a static IP from Infoblox for every new VM deployment and release it when the VM is destroyed.
Where is this integration configured?

• A. In the VM's "Custom Properties".
• B. In the "Network Profile" -> "IP Ranges".
• C. Infrastructure -> Integrations -> IPAM. The administrator adds an "IPAM" integration point, selects
  "Infoblox", and provides the credentials. Once configured, this integration can be linked to specific Network Profiles to handle IP allocation logic automatically.
• D. In VCF Automation Orchestrator using the "REST" plugin manually.

Answer: C

NEW QUESTION # 146
A Cloud Admin is tasked with "Right-Sizing" the virtual machines in a new VCF Workload Domain to reduce wasted resources.
Which VCF component is specifically designed to analyze historical demand patterns and recommend CPU/Memory reduction?

• A. VMware NSX
• B. VCF Operations
• C. SDDC Manager
• D. VCF Automation

Answer: B

NEW QUESTION # 147
A user wants to add a new widget to a dashboard that shows the distribution of "Error Types" (e.g.,
404 vs 500 vs 503) as a percentage of the total errors.
Which Chart Type should be selected in the Interactive Analytics view before adding it to the dashboard?

• A. Event List (Table).
• B. Pie Chart (or Donut Chart). This visualization is specifically designed to show parts of a whole (Distribution) based on the "Group By" field (Error Type).
• C. Gauge Chart.
• D. Time Series (Line Chart).

Answer: B

NEW QUESTION # 148
......

Achive your Success with Latest 3V0-22.25 Exam: https://www.validexam.com/3V0-22.25-latest-dumps.html

Achieve The Utmost Performance In 3V0-22.25 Exam Pass Guaranteed: https://drive.google.com/open?id=1ZMsu_9Ken7jJJRL10RtiJVE75YpFO7yH