2024 Latest Amazon ANS-C01 Real Exam Dumps PDF

ANS-C01 Exam Dumps, ANS-C01 Practice Test Questions

Amazon ANS-C01 exam is an advanced-level certification offered by Amazon Web Services (AWS) that is designed to validate a candidate's knowledge and expertise in advanced networking concepts and technologies. AWS Certified Advanced Networking Specialty Exam certification is intended for those who have prior experience in networking and are seeking to enhance their knowledge of AWS networking services.

Achieving the ANS-C01 certification demonstrates the candidate's expertise in designing and implementing advanced networking solutions on AWS. It also shows that the candidate has a deep understanding of AWS services and how they can be used to create secure, scalable, and highly available networks. AWS Certified Advanced Networking Specialty Exam certification is highly valued by employers who are looking for skilled networking professionals to manage their AWS infrastructure.

The ANS-C01 certification is highly valued by employers, particularly those that use AWS services extensively. It is a testament to the candidate's expertise in designing and implementing complex network solutions on AWS. Candidates who hold this certification are well-positioned to advance their careers in cloud networking, as it demonstrates their commitment to ongoing professional development and their ability to deliver high-quality solutions.

 

NEW QUESTION # 51
You have 99 routes in your dynamic BGP propagated route table and you wish to add 2 more: 10.1.0.0 and 10.3.0.0. You cannot modify or remove routes that have already been announced. What should you do?
Response:

• A. Just advertise them, the 100 route limit is a "soft limit" and will be expanded automatically.
• B. Call AWS support to increase your route limit.
• C. You cannot add these routes.
• D. Summarize the two routes to combine them into one and advertise it.

Answer: D

NEW QUESTION # 52
Your company has a set of instances hosted in a private subnet. These instances need to make calls to the Simple Storage Service. You have setup the Endpoint but are still not able to access the S3 buckets from the instances in the private subnet.
Which of the following could be issues for the access?
Choose 2 answers from the options given below
Response:

• A. You should be using an interface instead of a gateway for accessing the S3 service.
• B. The prefix for the endpoint is not attached to the Security Group
• C. Bucket policy attached to S3 buckets doesn't allow access to VPC endpoint
• D. The prefix for the endpoint is not attached to the Route table

Answer: C,D

NEW QUESTION # 53
You have an application in a VPC that requires access to on-premises Active Directory servers for joining the company domain. How will you enable this setup, considering low latency for domain join requests?
Response:

• A. Set up a VPN terminating on an Amazon EC2 instance in the VPC.
• B. Set up an AWS Direct Connect private VIF.
• C. Set up a Virtual Private Network (VPN) terminating on a Virtual Private Gateway (VGW) attached to the VPC.
• D. Set up an AWS Direct Connect public Virtual Interface (VIF).

Answer: B

NEW QUESTION # 54
A company has several production applications across different accounts in the AWS Cloud. The company operates from the us-east-1 Region only. Only certain partner companies can access the applications. The applications are running on Amazon EC2 instances that are in an Auto Scaling group behind an Application Load Balancer (ALB). The EC2 instances are in private subnets and allow traffic only from the ALB. The ALB is in a public subnet and allows inbound traffic only from partner network IP address ranges over port 80.
When the company adds a new partner, the company must allow the IP address range of the partner network in the security group that is associated with the ALB in each account. A network engineer must implement a solution to centrally manage the partner network IP address ranges.
Which solution will meet these requirements in the MOST operationally efficient manner?

• A. Create a new prefix list. Add all allowed IP address ranges to the prefix list. Use Amazon EventBridge (Amazon CloudWatch Events) rules to invoke an AWS Lambda function to update security groups whenever a new IP address range is added to the prefix list. Deploy this solution in all accounts.
• B. Create an Amazon DynamoDB table to maintain all IP address ranges and security groups that need to be updated. Update the DynamoDB table with the new IP address range when the company adds a new partner. Invoke an AWS Lambda function to read new IP address ranges and security groups from the DynamoDB table to update the security groups. Deploy this solution in all accounts.
• C. Create an Amazon S3 bucket to maintain all IP address ranges and security groups that need to be updated. Update the S3 bucket with the new IP address range when the company adds a new partner. Invoke an AWS Lambda function to read new IP address ranges and security groups from the S3 bucket to update the security groups. Deploy this solution in all accounts.
• D. Create a new prefix list. Add all allowed IP address ranges to the prefix list. Share the prefix list across different accounts by using AWS Resource Access Manager (AWS RAM). Update security groups to use the prefix list instead of the partner IP address range. Update the prefix list with the new IP address range when the company adds a new partner.

Answer: D

Explanation:
Creating a new prefix list and adding all allowed IP address ranges to the prefix list would enable grouping of CIDR blocks that can be referenced in security group rules3. Sharing the prefix list across different accounts by using AWS Resource Access Manager (AWS RAM) would enable central management of the partner network IP address ranges5. Updating security groups to use the prefix list instead of the partner IP address range would enable simplification of security group rules3. Updating the prefix list with the new IP address range when the company adds a new partner would enable automatic propagation of the changes to all security groups that use the prefix list3.

NEW QUESTION # 55
Some people in your company have created a very complicated and management-intensive workflow for automating development builds and testing.
They have requested those involved in creating it not to repeat this workflow more than once. The security organization, however, wants every developer to have their own account to reduce the blast radius of development issues.
What is the best design for providing access to the development system?
Response:

• A. Deploy the development system in a central VPC. Allow developers to access the system through AWS PrivateLink
• B. Provide one large Virtual Private Cloud (VPC). Configure network Access Control Lists (ACLs) and security groups so that the blast radius for developers is limited.
• C. Deploy the development system in a central VPC. Extend network interfaces with cross-account permissions so that developers can route their code to the development system.
• D. Ask the developers simply to automate the deployment of their build system and make it a distributed system. Deploy a copy of this in each developer VPC to prevent any blast radius or complexity problems.

Answer: A

NEW QUESTION # 56
An architecture is being designed to support an Amazon WorkSpaces deployment of 1,000 desktops.
Which architecture will support this deployment while allowing for future expansion?
Response:

• A. A VPC with a /16 CIDR and one /22 subnet
• B. A VPC with a /20 CIDR and two /21 subnets
• C. A VPC with a /16 CIDR and one /21 subnet
• D. A VPC with a /20 CIDR and two /23 subnets

Answer: B

NEW QUESTION # 57
A company is deploying a non-web application on an AWS load balancer. All targets are servers located on-premises that can be accessed by using AWS Direct Connect. The company wants to ensure that the source IP addresses of clients connecting to the application are passed all the way to the end server.
How can this requirement be achieved?

• A. Use an Application Load Balancer to automatically preserve the source IP address in the X-Forwarded-For header.
• B. Use a Network Load Balancer and enable the X-Forwarded-For attribute.
• C. Use a Network Load Balancer to automatically preserve the source IP address.
• D. Use a Network Load Balancer and enable the ProxyProtocol v2 attribute.

Answer: D

Explanation:
https://docs.aws.amazon.com/elasticloadbalancing/latest/network/load-balancer-target-groups.html#proxy-protocol

NEW QUESTION # 58
A company hosts a public hosted zone in Amazon Route 53. The company wants to configure DNS Security Extensions (DNSSEC) signing for the public hosted zone. All the company's business-critical applications are running in the us-west-2 Region.
The company has created a symmetric, customer managed, single-Region key in us-west-2 by using AWS Key Management Service (AWS KMS). A network engineer finds that the existing AWS KMS key cannot be used to create a key-signing key (KSK).
How can the network engineer resolve this issue?
Response:

• A. Recreate a symmetric, customer managed, multi-Region key in the us-east-1 Region. Use this key to create a KSK.
• B. Recreate an asymmetric, customer managed key with an ECC_NIST_P256 key spec in the us-east-1 Region. Use this key to create a KSK.
• C. Recreate a symmetric, customer managed, single-Region key in us-west-2. Use this key to create a KSK.
• D. Recreate an asymmetric, customer managed key with an ECC_NIST_P256 key spec in us-west-2. Use this key to create a KSK.

Answer: B

NEW QUESTION # 59
A company uses a VPN to connect to its AWS VPC. The CTO at the company wants to provision a 10 Gbps AWS Direct Connect connection for stability and performance. The telecom provider has provisioned the circuit from the company's data center to an AWS Direct Connect facility and needs information on how to cross-connect (that is, which rack/port to connect).
What is the process mandated by AWS for providing this information?
Response:

• A. Contact your AWS Account Manager with details of your AWS account number, telecom company's name, and the location where you want the Direct Connect connection to terminate
• B. Provision a new connection via the AWS Management Console and lookout for an email from AWS with the relevant information
• C. Contact AWS Support with details of your AWS account number, telecom company's name, and the location where you want the Direct Connect connection to terminate
• D. Ask your telecom provider to contact AWS through an AWS Direct Connect Delivery Partner and provide your AWS account number

Answer: B

NEW QUESTION # 60
An automatically assigned public IP is associated with an EC2 instance. Is NAT performed on this IP address? And if so, where?
Response:

• A. No
• B. Yes, at the NAT gateway
• C. Yes, at the Internet gateway

Answer: C

NEW QUESTION # 61
A company is deploying a new web application that uses a three-tier model with a public-facing Network Load Balancer and web servers in an Amazon VPC. The application servers are hosted in the company's data center. There is an AWS Direct Connect connection between the VPC and the company's data center.
Load testing results indicate that up to 100 servers, equally distributed across multiple Availability Zones, are required to handle peak loads. The Network Engineer needs to design a VPC that has a /24 CIDR assigned to it.
How should the Engineer allocate subnets across three Availability Zones for each tier?
Response:

• A. Network Load Balancer: /29 per subnet
  Web: /26 per subnet
• B. Network Load Balancer: /28 per subnet
  Web: /25 per subnet
• C. Network Load Balancer: /28 per subnet
  Web: /27 per subnet
• D. Network Load Balancer: /28 per subnet
  Web: /26 per subnet

Answer: D

NEW QUESTION # 62
Your organization is planning on connecting to AWS. The organization has decided to use a specific Virtual Private Network (VPN) technology for the first phase of the project. You are tasked with implementing the VPN server in a Virtual Private Cloud (VPC) and optimizing it for performance.
What are important considerations for Amazon EC2 VPN performance?
A) The VPN instance should support enhanced networking
B) Because all VPN connections use the Virtual Private Gateway (VGW), it's important to scale the VGW horizontally.
C) IP Security (IPsec) VPNs should use a Network Load Balancer to create a more scalable VPN service
D) Analyze the packet per second and bandwidth limitations
Response:

• A. A & D
• B. B & C
• C. A & B
• D. B & D

Answer: A

NEW QUESTION # 63
Which address should be used to access EC2 instance metadata from within the EC2 instance?
Response:

• A. http://169.254.169.254/latest/meta-data/
• B. http://168.254.168.254/latest/meta-data/
• C. http://168.254.168.254/latest/ec2-user
• D. http://169.254.169.254/latest/ec2-user

Answer: A

NEW QUESTION # 64
Which route will be used by the route table to send traffic to 10.1.1.24?
Response:

• A. 0.0.0.0/16
• B. 10.1.0.0/16
• C. Whichever applicable route appears first in the route table will be used.
• D. 10.1.1.0/24

Answer: D

NEW QUESTION # 65
You have created three Virtual Private Clouds (VPCs) named A, B, and C. VPC A is peered with VPC B.
VPC B is peered with VPC C. Which statement is true about this peering arrangement?
Response:

• A. Instances in VPC A can reach instances in VPC C if the correct routes are configured
• B. Instances in VPC A can reach instances in VPC C by default.
• C. Instances in VPC A can reach instances in VPC C if they use a proxy instance in VPC B.
• D. Instances in VPC A can reach instances in VPC C if they set their routes to an instance in VPC B.

Answer: C

NEW QUESTION # 66
What AWS Cloud service provides a logically-isolated section of the AWS Cloud where you can launch AWS resources in a logical network that you define?
Response:

• A. Amazon Simple Workflow Service (Amazon SWF)
• B. Amazon Virtual Private Cloud (Amazon VPC)
• C. AWS CloudFormation
• D. Amazon Route 53

Answer: B

NEW QUESTION # 67
Your security team implements a host-based firewall on all of your Amazon Elastic Compute Cloud (EC2) instances to block all outgoing traffic. Exceptions must be requested for each specific requirement. Until you request a new rule, you cannot access the instance metadata service.
Which firewall rule should you request to be added to your instances to allow instance metadata access?
Response:

• A. Inbound; Protocol tcp; Source [Instance's EIP]; Destination 169.254.169.254
• B. Inbound; Protocol tcp; Destination 169.254.169.254; Destination port 80
• C. Outbound; Protocol tcp; Destination 169.254.169.254; Destination port 80
• D. Outbound; Protocol tcp; Destination 169 .254.169.254; Destination port 443

Answer: C

NEW QUESTION # 68
In Amazon CloudFront, if you need to quickly remove objects from a distribution, you can:
Response:

• A. delete your distribution and recreate it.
• B. delete the objects from cache.
• C. remove your Amazon S3 bucket.
• D. invalidate the objects.

Answer: D

NEW QUESTION # 69
......

PDF (New 2024) Actual Amazon ANS-C01 Exam Questions: https://www.validexam.com/ANS-C01-latest-dumps.html

Dumps Moneyack Guarantee - ANS-C01 Dumps UpTo 90% Off: https://drive.google.com/open?id=1nrvOYgYFJ5VAxDxlyEVJKGV1n_Zbidt8