[2021] Use Valid Exam HPE6-A66 by ValidExam Books For Free Website

Free HP Certification HPE6-A66 Official Cert Guide PDF Download

Exam Topics

The following are covered in HP HPE6-A66 practice exams and HP HPE6-A66 practice test:

• Recommend the solution to the customer
• Plan and design an Aruba solution percustomer requirements
• Gather and analyze data, and document customer requirements
• Evaluate the requirements, and select the appropriate Aruba solution for the design
• Produce a detailed design specification document

Understanding functional and technical aspects of Gather and analyze data, and document customer requirements

The following will be asked from you in the HP HPE6-A66 exam dumps pdf:

• Given an outline of a customer’s needsfor a simple campus environment determine the information required to create a solution

 

NEW QUESTION 25
A company needs to replace an existing legacy wireless and wired solution with one that supports features like 802 11 ax for APs and logical switching for switches. The company is located on a single floor with two wiring closets. Assume that there will be 10 APs connected via POE+ to each wiring closet, along with 36 wired user connections All switches on a floor should be configured in a single stack. The distance between wiring closets is 100 feet (31 meters).
Which switching solution will minimally provide 10 Gbps uplinks at the most cost-effective price, while still meeting the company's requirements?

• A. 2930F switches
• B. 5406R switches
• C. 2930M switches
• D. 3810M switches

Answer: C

 

NEW QUESTION 26
Which type of Aruba AP uses its radio as its back-haul connection?

• A. Remote AP (RAP)
• B. Mesh Point
• C. Mesh Porta
• D. Air Monitor (AM)

Answer: C

 

NEW QUESTION 27
Which feature does the Aruba AP 555 support? (Select two.)

• A. high density indoor locations
• B. three radios
• C. weather proof and temperature hardened
• D. 802.11ac and lower standards only
• E. desk wall plate mounted

Answer: A,D

 

NEW QUESTION 28
When determining a customer's agenda and clarifying their expectations for a new HPE/Aruba deployment, which two questions should be asked during the stakeholder checklist? (Select two.)

• A. Which help desk system is deployed?
• B. is a request for proposal or actual bill of materials (BOM) required?
• C. What is the networking experience of onsite personnel?
• D. What is your anticipated growth of the environment?
• E. What business problems are you trying to solve?

Answer: B,E

 

NEW QUESTION 29
Which AP mode allows an AP to operate autonomously?

• A. AM
• B. IAP
• C. RAP
• D. OCAP

Answer: D

 

NEW QUESTION 30
A network architect is doing a site survey for a new wireless design One concern the company has with the old wireless network is coverage. In some cases, APs would lose power and some employees in the network would lose wireless connectivity. The new design needs to prevent this issue from occurring. During the site survey, what are best practices to be followed in regards to the dBm signal level and the power of the AP to ensure adequate wireless coverage and minimal overlap of AP signals for the new design?

• A. AP power at 100% and a measurement of -65 dBM on the measuring device
• B. AP power at 75% and a measurement of -80 dBM on the measuring device
• C. AP power at 75% and a measurement of -90 dBM on the measuring device
• D. AP power at 50% and a measurement of -65 dBM on the measuring device

Answer: A

 

NEW QUESTION 31
A company needs an upgrade of its access layer switches. The solution requires that devices connected to the access layer by authenticated and their traffic processed by the firewall features of the Aruba Mobility Controllers. Which solution should the company implement?

• A. GRE tunneling
• B. PAPI mobility
• C. Dynamic segmentation
• D. iPsec tunneling

Answer: D

 

NEW QUESTION 32
A network architect is redesigning the access layer in a data center for a customer. The access layer requires fixed-port switches that support VSF and data center features like L2 VXLAN and REST-API Which switching solution should the network architect recommend?

• A. 0
• B. 1
• C. 2930F
• D. 3810M

Answer: C

 

NEW QUESTION 33
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards. What type of survey should the network architect perform?

• A. Spectrum clearing
• B. Virtual
• C. Passive
• D. Active

Answer: D

 

NEW QUESTION 34
A network architect has developed a design for a new Aruba Wi-Fi network that will include a hardware Mobility Master (MM) running the ArubaOS 8 4 operating system that will manage:
* Two clustered 7205 controllers with 300 campus APs
* Two clustered VMC-50 controllers with 75 remote APs
The architect plans on creating user roles, firewall policies, and wireless IPS policies on the controllers as well as implementing AirMatch. What would meet the license requirements for this scenario?

• A. LIC-MM-VA-500. LIC-MC-VA-50 (X2), LIC-AP <x375). PEF (x375). RFP (x375)
• B. LIC-MM-VA-50, LIC-MC-VA-50 (X1), LIC-AP (X300), PEF <x300). RFP (x300)
• C. LIC-MC-VA-50 (x1), LIC-AP (300), PEF (X300). RFP (x300)
• D. LIC-MC-VA-50 (X2), LIC-AP (375), PEF (X375), RFP (X375)

Answer: B

 

NEW QUESTION 35
A network architect needs to design a new wireless solution for a small company The architect estimates that about 150 APs will be required to implement a capacity design. Roaming support is required. Also, the design requires meshing to connect some of the APs to the network.
The customer requires that client state synchronization be provided for real-time failover.
Which solution would most cost-effectively meet these requirements?

• A. lAPs in a cluster
• B. Two 7030 mobility controller and campus APs in a cluster
• C. Two 7205 mobility controller and campus APs in a cluster
• D. FRAPs in a cluster

Answer: D

 

NEW QUESTION 36
A wiring closet with a POE+ switch is 250 feet (76 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is capable of 10 Gbps. The cable type is Cat5e STP. What is the maximum speed that the customer can expect from the connected AP?

• A. 10 Gbps
• B. 5 Gbps
• C. 1 Gbps
• D. 2.5 Gbps

Answer: D

 

NEW QUESTION 37
A company has chosen an Aruba mobility controller solution for the redesign of their wireless network The design will have two 7205 controllers in a cluster for campus employees and a single VMC-50 virtual controller for remote access via a DMZ. A Mobility Master (MM) is used for centralized license and controller management. All controllers will minimally run ArubaOS 8 4 or later Currently the company has 1.000 employees. There are 30 branch offices that will use RAPs to connect to the DMZ controller. A peak of 100 users concurrently using the VIA client will also connect to the DMZ controller.
How many Aruba LIC-VIA licenses does the company need to purchase for this solution?

• A. 0
• B. 1,030
• C. 1
• D. 2

Answer: B

 

NEW QUESTION 38
A network architect wants to estimate the number of Aruba APs that will be needed Tor a new wireless design and determine the wireless coverage using VisualRF. The company requires a high-density design. The building has 200.000 square feet. How many APs should the network architect add to VisualRF in order to perform the coverage analysis?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: B

 

NEW QUESTION 39
A customer requires a campus core virtualization solution that supports a dual control and management planes, as well as active-active forwarding paths. Which solution would meet the customer's requirements?

• A. VSX
• B. Mesh stacking
• C. Backplane stacking
• D. VSF

Answer: C

 

NEW QUESTION 40
A network architect is replacing an old wireless implementation based on 802.11 a with a new wireless solution. The company has a lot of money invested in legacy wireless barcode scanners and will not be replacing them. However, the bandwidth that the company expects each AP to have less than 700 Mbps in bandwidth, and this is not expected to change in the future.
Which wireless solution would best meet this company's needs and be the most cost-effective?

• A. 802.11g
• B. 802.11ax
• C. 802.11ac
• D. 802.11n

Answer: B

 

NEW QUESTION 41
NewRocket requires a wireless capacity design 30 Aruba 510 APs will be connected to each wiring closet using SmartRate connections. Wireless coverage needs to be provided even if a POE+ switch loses power Because of security concerns, wired video cameras were recently installed throughout the facility. There are 12 of these per floor. 6 per wiring closet. The cameras are 802.11n WiFi capable and have power injectors from which to draw power.
Based on the POE+ needs of the mentioned devices, which solution would meet the POE+ requirements while still providing a redundant and cost-effective Wi-Fi solution for the devices that require POE+ for Building 1, Floor 2?

• A. Two 2930M 24-port POE+ switches
• B. One 3810M 40G 8 HPE Smart Rate switch
• C. Two 2930F 24-port POE+ switches
• D. One 2930M 48-port POE+ switch

Answer: D

 

NEW QUESTION 42
NewStellar has a main corporate campus in a business park with two adjacent buildings that are 150 feet apart (46 meters). This is an open campus with no obstructions between the two buildings Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters) The network architect has given one floor to analyze. Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply, and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters).
The company has determined that Wi-Fi coverage will not include the central area of each floor, which includes the washrooms, stairs, elevators and supply and network cabinets. Based on a capacity design, approximately how many APs should a network architect add to each floor to plan the design in VisuaiRF?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: C

 

NEW QUESTION 43
A network architect plans to implement channel bonding in a new wireless design that involves dense deployment of APs. Which channel width would be optimal for this design?

• A. 20 MHz
• B. 60 MHZ
• C. 10MHZ
• D. 40 MHZ

Answer: B

 

NEW QUESTION 44
A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?

• A. 802.11r
• B. S02.11h
• C. 802.11 ax
• D. S02.11V

Answer: C

 

NEW QUESTION 45
A customer has a need to track traffic patterns and anomalies on a pair of ArubaOS-CX 8400 series switches. Which technology will the customer need to deploy for these switches?

• A. NetEdit
• B. Network Analysis Engine
• C. Mobility First
• D. 2 CiearPass

Answer: A

 

NEW QUESTION 46
A network architect is designing a new Wi-Fi solution for a small university The solution will involve two mobility controllers that will be clustered at the campus core Because students use a lot of video in both the dormitory rooms and in the classrooms, the solution will need to support 50Gbps via link aggregation between the controllers and core switches.
Which solution would most cost-effectively meet this requirement for the campus core?

• A. Aruba 7280 mobility controllers and 5406R switches
• B. Aruba 7240XM mobility controllers and 3810M switches
• C. Aruba 7210 mobility controllers and 5406R switches
• D. Aruba 7220 mobility controllers and 3810M switches

Answer: D

 

NEW QUESTION 47
Refer to the exhibit.

When planning the use of Cat7 cabling for a SmartRate connection between an ArubaOS AP and an ArubaOS switch, which sections should be considered when calculating distance?

• A. A + C
• B. A + B + C
• C. A + B + C + D
• D. A + B

Answer: C

 

NEW QUESTION 48
Which component uniquely defines the BSSID when implementing an employee SSID?

• A. Case-sensitive SSID name
• B. Wireless device MAC address
• C. Radio MAC address
• D. Case-insensitive SSID name

Answer: B

 

NEW QUESTION 49
......

Understanding functional and technical aspects of Evaluate the requirements, and select the appropriate Aruba solution for the design

The following will be asked from you in the HP HPE6-A66 dumps:

• Given a scenario, evaluate the customer requirementsfor a simple campus environment identify gaps per a gap analysis, and select components based on the analysisresults
• Given a scenario, translate the business needs of a simple campus environment into technicalcustomer requirements

 

HP HPE6-A66 Official Cert Guide PDF: https://www.validexam.com/HPE6-A66-latest-dumps.html

Exam HPE6-A66: Aruba Certified Design Associate Exam - ValidExam: https://drive.google.com/open?id=1eTHNh7Bk455-Y6KiPk6DZCxGVrdmXiW-